This document was generated from CDN thread
Created by: Said abdul kader Ibrahim on 12-02-2012 10:21:46 PM
Hi experts,
Next week I have new deployment for Cisco telepreance with the following BOQ:
Video endpoints:
-C20 ---TC 4.4 (plan to register with VCS-e)
- EX 90 ---- TC 4.4 (plan to register with VCS-e)
- Movi --- 4 (already include with VCS-e)
- Cisco Cius (plan to register with CUCM 7.1)
Call process:
VCS starter Pack version 6.1
Q&A:
-VCS starter pack already include Movi does it same software or it’s already replace by Cisco Jabber.
- can I configure SIP trunk between VCSe and CUCM 7.1.3 to allow Cisco CIUS join video conference call “multisite” if Cius call ex 90. (Call setup: Cius -----SIP ----CUCM-----VCS ------ex 90)
- VCSe will be allocate on DMZ for movi user to be able to call from internet to endpoints internally….what is the recommendation for VCS on dmz should be assign public ip address or private ip address “Nated”.
What ports should be enable for endpoints internally to register & for traversal call with Vcs also same for outside endpoints “Movi and VC endpoints”
Many thanks,
Saeed
