cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
91
Views
0
Helpful
0
Comments
cdnadmin
Community Member
This document was generated from CDN thread

Created by: Ken Mills on 26-10-2010 05:33:19 PM
I'm just getting started with JTAPI and had a couple of questions...
 
1. Is there a sample application that shows how to perform recording of a device? I have successfully used makeCall but wanted something closer to the functionality my app would be performing.
 
2. How do I set the destination RTP IP/Port when I want to record? I was hoping my application would supply this before I start recording but I don't see a JTAPI call to set that up only to get the settings the device will be using.
 
Any help would be appreciated...
 
Ken

Subject: RE: JTAPI: Device recording question
Replied by: David Staudt on 26-10-2010 08:12:48 PM
Unfortunately we don't have a working sample project for recording (a good idea), however note that CTI recording via the phone's built-in media bridge to fork media actually results in a complete second call from a phone to a DN.  This DN must route to a SIP trunk connected to UCM, which is provided by the application.  So in effect the app specifies its per call media IP/port by implementing a SIP trunk termination, and providing IP/port via standard SIP SDP signaling as each recording call comes in to the trunk.
 
See the 'Cisco Unified CM Silent Monitoring & Recording Overview.ppt' document here: http://developer.cisco.com/web/sip/docs
 
There is also a more detailed 'Cisco Unified CM Silent Monitoring & Recording Specification' which requires a CDN developer support contract to access, as some details of the SIP trunk implementation are Cisco proprietary extensions.
 
 
 

Subject: RE: JTAPI: Device recording question
Replied by: Ken Mills on 26-10-2010 08:36:50 PM
Thanks for the quick response and the links.
 
Looks like I have a bit more research to do.
 
Thanks again.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links