This document was generated from CDN thread
Created by: Arun KS on 18-08-2010 08:27:53 AM
Hi,
I am new to JTAPI programming. through my previous queries i came to know that it is possible to download the JTAPI client from CUCM. as per the instruction i downloaded the exe. using the JTAPI documentation i tried to install the client while installing the client at some point it is asking for TFTP address is it mandatory to provide that. i have some more queries.
1) Is that mandatory to provide the CUCM and TFTP address in JTPrefs client interface.
2) Is it possible to connect to a CUCM through code without configuring the CUCM in JTPrefs.
i saw the make call code snippet where they are providing the cucm ip ,user name and password.
advance thanks
Subject: RE: JTAPI Preference(JTAPI.ini)
Replied by: Anitha V on 18-08-2010 09:37:30 AM
Hi Arun,
It is not mandatory to provide the CUCM and TFTP address in JTPrefs client interface. While getting provider, application has to sent the IP addr of the CUCM as a parameter which will help connecting to the CCM.
Also, it is possible to connect to a CUCM through code without configuring the CUCM in JTPrefs.
Hope this helps.
Thanks and Regards,
Anitha
Cisco Developer Services