cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
104
Views
0
Helpful
0
Comments
cdnadmin
Community Member
This document was generated from CDN thread

Created by: null on 21-01-2008 02:20:45 PM
I am observing an error at the Cisco VXML Gateway.

*Jan 21 13:21:16.525: %ISDN-6-DISCONNECT: Interface Serial1/0/0:21 disconnected
from 00914442094138 , call lasted 29 seconds
*Jan 21 13:21:34.753: //154759/8283C4DC96F5/VXML:/vxml_bgload_post_done:
CALL_ERROR; http://10.11.8.28:7000/CVP/Server
Loading fail with url (http://10.11.8.28:7000/CVP/Server)

What could be the possible reason for this CALL_ERROR? Thanks in advance.

Thanks!
-Sethu

Subject: RE: Loading fail with URL
Replied by: Janine Graves on 22-01-2008 02:53:14 AM
is this the initial URL? If so, you need to be invoking an application for that URL to work.

It should look like this:

http://10.11.8.28:7000/CVP/Server?application=HelloWorld

Are you using CVP Standalone or ICM to front the call? The way to configure the application to use is different based on the architecture.

Janine

Subject: RE: Loading fail with URL
Replied by: null on 22-01-2008 05:29:58 AM
Thanks for your response. It is a comprehensive model deployment. The initial URL is successful, while trying to collect TPIN using Digits element, the URL is failed.

Subject: RE: Loading fail with URL
Replied by: Janine Graves on 22-01-2008 05:57:44 PM
There is more information needed really. You should try to eliminate some easy things:

Can you make any call into a self service app that lasts longer than 29-30 seconds? If not, you may have to fix the ICM external VRU Script and set the 'timeout' to be long enough so your self-service app can finish.

Does the app always get the error at this same location (element)?

Can you include some other elements before this element that execute correctly?

Can you execute any collection elements correctly (digits or number or menu)? if not, maybe the gateway adapter you selected is incorrect.

If you have DTMF-only system, then you have to select the DTMF-only gateway adapter in project/properties and also in the collection element, specify inputMode as DTMF.

Can you run the application through correctly using a web browser? If so, then it's either the gateway or the asr/tts.

Subject: No CVP Discussions
Replied by: Cory Wright on 28-01-2008 05:18:00 AM
I'd ask for the CVP Discussions to stop. These are off topic...

Topics here are for Universal Edition only. Unfortunately, TAC is your only method of support for CVP matters.

Please see the Cisco Transition Forum for more information. http://www.audiumcentral.com/supportcenter/viewforum.php?f=94

Regards,
Cory
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links