cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1791
Views
0
Helpful
0
Comments
TCC_2
Advocate
Advocate

Core Issue

On a 2800 Series router that is configured as a Cisco IOS  Voice over IP (VoIP) gateway, an inbound call to the Foreign Exchange Office (FXO) ports fails with no audio. This issue is observed when the caller-id enable command is configured on the FXO ports. Neither party can hear one another and this error is shown on the debug level:

mbrd_e1t1_vic_connect: setup failed
flex_dsprm_tdm_xconn: voice-port(0/0/0), dsp_channel(/0/0/0)
or
mbrd_e1t1_vic_connect: setup failed
flex_dsprm_tdm_xconn: voice-port(0/0/1), dsp_channel(/0/0/0)

Resolution

This issue is documented in Cisco bug ID CSCse56660. The only possible workaround for this Cisco IOS software release is to disable Caller ID on the FXO ports.

In order to resolve this issue, upgrade the Cisco IOS software release as mentioned in the First Fixed-in Version 12.4(4)XC03, 12.4(07b), 12.4(08a), 12.4(9.17), 12.4(03f), 12.4(10.1)T, 12.4(9)T01, 12.4(6)T04, 12.4(4)T05.

Refer to How to enable the Caller ID (CLID) name delivery feature on Cisco IP phones for inbound PSTN calls on the FXO port for more information on how to enable or disable Caller ID.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers
Quick Links