script to play ringback tone

[cdnadmin]

This document was generated from CDN thread

Created by: frisko frisko on 21-07-2012 12:39:09 AM
i need help to have a simple script that only palys Ringback tone for inbound calls till the call is answered.
 
Thanks in advance

Subject: RE: script to play ringback tone
Replied by: Anusha Kannappan on 23-07-2012 08:56:19 AM
Hi,

leg alert could be used. For more details you could refer to the sample applications in the Documentation section and Programmers guide..

Thanks,
Anusha

Subject: RE: script to play ringback tone
Replied by: frisko frisko on 23-07-2012 05:57:13 PM
Anusha, thank you for your response, i am new to this so if you could post a
link to where i can find an example similar to what i need i will be grateful
also if you can send me your email to discussion the possibility of script
development to friskopart@yahoo.com
 
Regards

Subject: RE: script to play ringback tone
Replied by: Anusha Kannappan on 23-07-2012 11:46:47 PM
Hi,

You can find the TCL IVR programming guide and the videos in the following locations

http://developer.cisco.com/web/vgapi/resources
http://developer.cisco.com/web/vgapi/vid

By going through the above documents you will get an idea of how to write a simple script and here the link where you can find the sample applications

http://developer.cisco.com/web/vgapi/docs

If you further need help in developing scripts please raise developer support case we will help you to create tcl script for your requirements. For more information you can refer below link.

http://developer.cisco.com/web/devservices/alldevs

Thanks,
Anusha

Subject: RE: script to play ringback tone
Replied by: Tomas Ussher on 24-07-2012 08:17:56 AM

If you further need help in developing scripts please raise developer support case we will help you to create tcl script for your requirements.

 
Just curious, why is that Cisco assumes that people asking on this forum does have a Developer Support contract costing many thousand of dollars per year ? In fact I think almost nobody has one.

Subject: RE: script to play ringback tone
Replied by: frisko frisko on 25-07-2012 11:16:55 AM
Hello anusha,

 i was looking for an already developed script that i can buy as it is urgent and I can’t afford the time needed to learn how to develop it now, if you can redirect me to where I can buy such services or script without having to subscribe to an annual development support services that i would most likely will not use after having this issue resolved.

 many thanks for your help

Subject: RE: script to play ringback tone
Replied by: Anusha Kannappan on 26-07-2012 02:40:30 AM
Hi,

You can download the How to test TCL IVR Scripts in Cisco Voice Gateway.zip file from the following link

http://developer.cisco.com/web/vgapi/docs/-/document_library/view/3792564

which has a simple application Tcl_IVR_tutorial1.tcl which depicts a simple A to B call and attached video showing to test the script.

Hope it will be useful for you.

Thanks,
Anusha

Thanks,
Anusha