This document was generated from CDN thread
Created by: Selim Budakoglu on 01-12-2008 04:29:27 PM
Hi all,
Does anyone know how to change & read ICM ECC data from CVP script? I know I can send these variables from ICM script to CVP script by using ToExtVXML then send back by using subdialog return element from CVP Script, but I dont want to do it like that. When the call in CVP script without turning back to the ICM how can I change & read ECC variables values?
My current configuration is CVP 7.0.2, ICM 7.2.5, CM 6.1 and as I know I can not use RecICMLabel if I am not using CVP standalone mode.
Any thoughts ?
Regards.
Subject: Re: Set & Get ECC data in CVP script...
Replied by: GEOFFREY THOMPSON on 04-12-2008 02:15:42 PM
"but I dont want to do it like that"
Why not?
Although the ReqICMLabel element does allow a standalone CVP to talk to a non-integrated ICM, and was designed for that, it's my understanding that you can use it when CVP is integrated to ICM. I've never done this and see no need for it - but I believe it works.
Regards,
Geoff
Subject: Re: Set & Get ECC data in CVP script...
Replied by: GEOFFREY THOMPSON on 13-12-2008 04:24:49 AM
Update - a colleague was playing with this the other day. It doesn't work in a Comprehensive environment. It's not the right way to pass data.
Regards,
Geoff
Subject: Re: Set & Get ECC data in CVP script...
Replied by: Selim Budakoglu on 27-12-2008 05:24:59 PM
Hi,
Because I have a huge IVR flows. I split that flows about 80 pieces, subdialogs actually. You know I have to pass and return all the data to/from subdialogs and believe me I have many variables. Therefore I have been trying to pass minimum data to subdialogs as less as possible and you know if I want to do that I have to reach call data directly from subdialogs.
Regards.
Subject: Re: Set & Get ECC data in CVP script...
Replied by: Matthias Neubacher on 27-12-2008 06:14:06 PM
Guten Tag,
besten Dank für Ihre Nachricht. Ich bin bis zum 05.01.09 abwesend und habe keinen Zugriff auf meine E-Mails.
Unsere Büros in Heppenheim bleiben von Montag, 22. Dezember 2008 bis Montag, 5. Januar 2009 geschlossen.
In dringenden Fällen wenden Sie sich bitte an +49 6252 674 444.
Freundliche Grüsse und schöne Festtage
BUCHER + SUTER AG
Matthias Neubacher
Hi
I'm out of the office until 05. Jan 09 and have no access to my e-mail account.
Our offices in Heppenheim will be closed from Monday, 22 December 2009 until Monday 5 January 2009.
In urgent cases please contact +49 6252 674 444.
Best regards and Merry Christmas,
BUCHER + SUTER AG
Matthias Neubacher
Subject: Re: Set & Get ECC data in CVP script...
Replied by: SEAN NILSEN on 02-01-2009 11:08:06 PM
I can add another opinion to the question of "Why Not?"
Because one size does not fit all. I'm in a situation along with the original poster. Lots of data going back and forth between ICM for driving interactions and CVP for providing the front end to the customer and back end to other systems.
IPIVR has specific nodes for GET and SET of ICM data and it's my hope that at some point the integration is tight enough between CVP and ICM that this becomes a "feature."
There are some of out here who allow customers to self serve, or have membership ID's, balances, interaction data, etc. that all moves with the call and get added to incrementally at each interaction. This results in a large dataset that each application should be able to access.
In an application architecture that is relatively "Open" this is one area that is lacking. From my experience integrating OTHER vendor's IVR technologies, there are definitely methods of directly manipulating PV's and ECC Var's that don't invilve a string of concatenates in and mid's out.
They all come over the GED interface anyway so why not access them directly instead of wasting time hashing out both sides of the To/FromExtVXML?
Hopefully a "future" that's on the feature list.
Subject: Re: Set & Get ECC data in CVP script...
Replied by: SEAN NILSEN on 03-01-2009 12:32:23 AM
I can add another opinion to the question of "Why Not?"
Because one size does not fit all. I'm in a situation along with the original poster. Lots of data going back and forth between ICM for driving interactions and CVP for providing the front end to the customer and back end to other systems.
IPIVR has specific nodes for GET and SET of ICM data and it's my hope that at some point the integration is tight enough between CVP and ICM that this becomes a "feature."
There are some of out here who allow customers to self serve, or have membership ID's, balances, interaction data, etc. that all moves with the call and get added to incrementally at each interaction. This results in a large dataset that each application should be able to access.
In an application architecture that is relatively "Open" this is one area that is lacking. From my experience integrating OTHER vendor's IVR technologies, there are definitely methods of directly manipulating PV's and ECC Var's that don't invilve a string of concatenates in and mid's out.
They all come over the GED interface anyway so why not access them directly instead of wasting time hashing out both sides of the To/FromExtVXML?
Hopefully a "future" that's on the feature list.
Subject: Re: Set & Get ECC data in CVP script...
Replied by: Adam Mermel on 04-01-2009 09:39:56 PM
Hi,
This is definitely on the desired list for a future release. Unfortunately, as there is a work-around, it did not make it into the past release. We do review it every cycle, and would like to make the usage easier.
Adam Mermel.