Subject: RE: SIP - CUBE - Sip Profile Configuration
Replied by: John Cowher on 05-05-2010 12:33:33 PM
This is an update from myself, I realize that the INFO message change I want to make is in the message body, not the header, and do not know if there are any supported changes to that in Cisco CUBE, I am also not real familiar with the sip profile syntax. Here is what I have done that does not work.
voice class sip-profiles 10
request INVITE sip-header Content-Type modify "Signal=11" "Signal=#"
request INVITE sip-header Content-Type modify "Signal=11" "Signal=#"
request INFO sip-header Content-Type modify "Signal=11" "Signal=#"
request INFO sip-header Content-Disposition modify "Signal=11" "Signal=#"
request INFO sdp-header Session-Info modify "Signal=11" "Signal=#"
!
This document was generated from CDN thread
Created by: John Cowher on 04-05-2010 05:55:09 PM
I want to change/modify the "Signal =11" in the below message to "Signal =#" can anyone respond on the creating a sip profile to do this?
From: "Manager"<sip:100@10.101.103.210:5060;user=phone>;tag=10.101.103.210+1+2dc0003+33b621f2
To: ""<sip:4051@172.25.30.21:5060;user=phone>;tag=5CD20A0-161A
CSeq: 632197477 INFO
Supported: replaces
Content-Type: application/dtmf-relay
Content-Length: 25
User-Agent: Wave/10.5.3051.2242
Signal=11
Duration=100
