cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
196
Views
0
Helpful
0
Comments
cdnadmin
Community Member
This document was generated from CDN thread

Created by: Arvind Sharma on 20-08-2010 02:35:38 PM
Hi,
 
I see, sometimes, this error when pressing the SoftKey on the phone for telephony operation (e.g. Conference, Redial etc). These are required for the testing.
 
 Error Conferencing Call:
TelephonyException: Error: Platform Exception, 357991, SEP0016C791D194, Sending: <?xml version="1.0" encoding="UTF-8"?><CiscoIPPhoneExecute><ExecuteItem Priority="0" URL="Key:KeyPad1"/></CiscoIPPhoneExecute>
    ......
Caused by: com.cisco.jtapi.PlatformExceptionImpl: CCNException not handled:com.cisco.cti.client.CCNException: deviceDataPassThrough request failed
    at com.cisco.jtapi.TerminalImpl.sendData(CTQF)
    at com.cisco.jtapi.TerminalImpl.sendData(CTQF)
    ... 16 more


This is with CUCM 7.1. I am using JTAPI client library - jtapi-6.1_4.1000.jar - for product related reasons I have to use the older jar.  Could that be the reason ?
 
What does this CTQF exception means ?
 
Thanks!
Arvind

Subject: RE: New Message from Arvind Sharma in Cisco JTAPI (JTAPI) - Cisco JTAPI Que
Replied by: Arvind Sharma on 20-08-2010 08:07:41 PM
This is 7960 model.
 
The thing is that the error happens intermittently. Other times the SendData() works.
 
On the CTI log side - nothing jumps out (log level is set to ERROR though)
 
Arvind
 
What is the model number of the phone you are sending to here?
SendData() is not supported on all phone models.

This exception is a generic error when there is a failure at the layers
underneath JTAPI. It could be that the phone is an incorrect model, or
it could be that there was some other failure in CTI or the CUCM.

----------------------------------------------------------
Joseph Moskie
JTAPI Development Engineer


________________________________

From: Cisco Developer Community Forums
[mailto:[email protected]]
Sent: Friday, August 20, 2010 7:36 AM
To: [email protected]
Subject: New Message from Arvind Sharma in Cisco JTAPI (JTAPI) - Cisco
JTAPI Questions: Softkey - sendData() Error


Arvind Sharma has created a new message in the forum "Cisco JTAPI
Questions":
--------------------------------------------------------------
Hi,

I see, sometimes, this error when pressing the SoftKey on the phone for
telephony operation (e.g. Conference, Redial etc). These are required
for the testing.

Error Conferencing Call:
TelephonyException: Error: Platform Exception, 357991, SEP0016C791D194,
Sending: <?xml version="1.0"
encoding="UTF-8"?><CiscoIPPhoneExecute><ExecuteItem Priority="0"
URL="Key:KeyPad1"/></CiscoIPPhoneExecute>
    ......
Caused by: com.cisco.jtapi.PlatformExceptionImpl: CCNException not
handled:com.cisco.cti.client.CCNException: deviceDataPassThrough request
failed
    at com.cisco.jtapi.TerminalImpl.sendData(CTQF)
    at com.cisco.jtapi.TerminalImpl.sendData(CTQF)
    ... 16 more

This is with CUCM 7.1. I am using JTAPI client library -
jtapi-6.1_4.1000.jar - for product related reasons I have to use the
older jar.  Could that be the reason ?

What does this CTQF exception means ?

Thanks!
Arvind
--
To respond to this post, please click the following link:
<http://developer.cisco.com/web/jtapi/forums/-/message_boards/message/24
57628>
or simply reply to this email.


Subject: RE: New Message from Arvind Sharma in Cisco JTAPI (JTAPI) - Cisco JTAPI Que
Replied by: Joseph Moskie on 20-08-2010 07:23:36 PM
What is the model number of the phone you are sending to here?
SendData() is not supported on all phone models.

This exception is a generic error when there is a failure at the layers
underneath JTAPI. It could be that the phone is an incorrect model, or
it could be that there was some other failure in CTI or the CUCM.

----------------------------------------------------------
Joseph Moskie
JTAPI Development Engineer


________________________________

From: Cisco Developer Community Forums
[mailto:[email protected]]
Sent: Friday, August 20, 2010 7:36 AM
To: [email protected]
Subject: New Message from Arvind Sharma in Cisco JTAPI (JTAPI) - Cisco
JTAPI Questions: Softkey - sendData() Error


Arvind Sharma has created a new message in the forum "Cisco JTAPI
Questions":
--------------------------------------------------------------
Hi,

I see, sometimes, this error when pressing the SoftKey on the phone for
telephony operation (e.g. Conference, Redial etc). These are required
for the testing.

Error Conferencing Call:
TelephonyException: Error: Platform Exception, 357991, SEP0016C791D194,
Sending: <?xml version="1.0"
encoding="UTF-8"?><CiscoIPPhoneExecute><ExecuteItem Priority="0"
URL="Key:KeyPad1"/></CiscoIPPhoneExecute>
    ......
Caused by: com.cisco.jtapi.PlatformExceptionImpl: CCNException not
handled:com.cisco.cti.client.CCNException: deviceDataPassThrough request
failed
    at com.cisco.jtapi.TerminalImpl.sendData(CTQF)
    at com.cisco.jtapi.TerminalImpl.sendData(CTQF)
    ... 16 more

This is with CUCM 7.1. I am using JTAPI client library -
jtapi-6.1_4.1000.jar - for product related reasons I have to use the
older jar.  Could that be the reason ?

What does this CTQF exception means ?

Thanks!
Arvind
--
To respond to this post, please click the following link:
<http://developer.cisco.com/web/jtapi/forums/-/message_boards/message/24
57628>
or simply reply to this email.

Subject: RE: New Message from Arvind Sharma in Cisco JTAPI (JTAPI) - Cisco JTAPI Que
Replied by: Peter Burger on 20-09-2010 01:21:45 PM
Did you find any solution to the problem described above?
 
I have pretty much the same thing here and does not have an clue whats wrong...
 
I use models 7975, 7962 and 7921.
 
This is 7960 model.
 
The thing is that the error happens intermittently. Other times the SendData() works.
 
On the CTI log side - nothing jumps out (log level is set to ERROR though)
 
Arvind


What is the model number of the phone you are sending to here?
SendData() is not supported on all phone models.

This exception is a generic error when there is a failure at the layers
underneath JTAPI. It could be that the phone is an incorrect model, or
it could be that there was some other failure in CTI or the CUCM.

----------------------------------------------------------
Joseph Moskie
JTAPI Development Engineer


________________________________

From: Cisco Developer Community Forums
[mailto:[email protected]]
Sent: Friday, August 20, 2010 7:36 AM
To: [email protected]
Subject: New Message from Arvind Sharma in Cisco JTAPI (JTAPI) - Cisco
JTAPI Questions: Softkey - sendData() Error


Arvind Sharma has created a new message in the forum "Cisco JTAPI
Questions":
--------------------------------------------------------------
Hi,

I see, sometimes, this error when pressing the SoftKey on the phone for
telephony operation (e.g. Conference, Redial etc). These are required
for the testing.

Error Conferencing Call:
TelephonyException: Error: Platform Exception, 357991, SEP0016C791D194,
Sending: <?xml version="1.0"
encoding="UTF-8"?><CiscoIPPhoneExecute><ExecuteItem Priority="0"
URL="Key:KeyPad1"/></CiscoIPPhoneExecute>
    ......
Caused by: com.cisco.jtapi.PlatformExceptionImpl: CCNException not
handled:com.cisco.cti.client.CCNException: deviceDataPassThrough request
failed
    at com.cisco.jtapi.TerminalImpl.sendData(CTQF)
    at com.cisco.jtapi.TerminalImpl.sendData(CTQF)
    ... 16 more

This is with CUCM 7.1. I am using JTAPI client library -
jtapi-6.1_4.1000.jar - for product related reasons I have to use the
older jar.  Could that be the reason ?

What does this CTQF exception means ?

Thanks!
Arvind
--
To respond to this post, please click the following link:
<http://developer.cisco.com/web/jtapi/forums/-/message_boards/message/24
57628>
or simply reply to this email.



Subject: RE: New Message from Arvind Sharma in Cisco JTAPI (JTAPI) - Cisco JTAPI Que
Replied by: Arvind Sharma on 20-09-2010 02:51:50 PM
Well, in my case upgrading the JTAPI client library from the CUCM resolved this issue. I was using slightly older minor version of the library.
 
Arvind
 
 
 
Did you find any solution to the problem described above?
 
I have pretty much the same thing here and does not have an clue whats wrong...
 
I use models 7975, 7962 and 7921.


This is 7960 model.
 
The thing is that the error happens intermittently. Other times the SendData() works.
 
On the CTI log side - nothing jumps out (log level is set to ERROR though)
 
Arvind


What is the model number of the phone you are sending to here?
SendData() is not supported on all phone models.

This exception is a generic error when there is a failure at the layers
underneath JTAPI. It could be that the phone is an incorrect model, or
it could be that there was some other failure in CTI or the CUCM.

----------------------------------------------------------
Joseph Moskie
JTAPI Development Engineer


________________________________

From: Cisco Developer Community Forums
[mailto:[email protected]]
Sent: Friday, August 20, 2010 7:36 AM
To: [email protected]
Subject: New Message from Arvind Sharma in Cisco JTAPI (JTAPI) - Cisco
JTAPI Questions: Softkey - sendData() Error


Arvind Sharma has created a new message in the forum "Cisco JTAPI
Questions":
--------------------------------------------------------------
Hi,

I see, sometimes, this error when pressing the SoftKey on the phone for
telephony operation (e.g. Conference, Redial etc). These are required
for the testing.

Error Conferencing Call:
TelephonyException: Error: Platform Exception, 357991, SEP0016C791D194,
Sending: <?xml version="1.0"
encoding="UTF-8"?><CiscoIPPhoneExecute><ExecuteItem Priority="0"
URL="Key:KeyPad1"/></CiscoIPPhoneExecute>
    ......
Caused by: com.cisco.jtapi.PlatformExceptionImpl: CCNException not
handled:com.cisco.cti.client.CCNException: deviceDataPassThrough request
failed
    at com.cisco.jtapi.TerminalImpl.sendData(CTQF)
    at com.cisco.jtapi.TerminalImpl.sendData(CTQF)
    ... 16 more

This is with CUCM 7.1. I am using JTAPI client library -
jtapi-6.1_4.1000.jar - for product related reasons I have to use the
older jar.  Could that be the reason ?

What does this CTQF exception means ?

Thanks!
Arvind
--
To respond to this post, please click the following link:
<http://developer.cisco.com/web/jtapi/forums/-/message_boards/message/24
57628>
or simply reply to this email.




Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links