TCL 911 script added with IP-address of calling phone

[cdnadmin]

This document was generated from CDN thread

Created by: Holger Herb on 30-06-2010 09:10:48 PM
Hi,
 
there is a great tcl script for emergency calls under
http://forums.cisco.com/eforum/servlet/EEM?page=eem&fn=script&scriptId=2061
ip-phone (DN example 4711) dials 911. In this case a syslog message is created and sent via mail to an appropriate reciptient (e.g. recption) saying that 4711 dialed 911. Is there a way to extend the script that the IP-address of the calling phone (here 4711) will be also included in the message?
 
Thanks
 
Holger

Subject: RE: TCL 911 script added with IP-address of calling phone
Replied by: Anusha Kannappan on 01-07-2010 08:55:38 AM
Hi Holger,
 
Yes, it is possible to retrieve the IP-address of the calling phone by using the following information tag
leg_remoteipaddress.
Description:
------------
Returns the remote IP address of the endpoint from which the call is received. If the IP address is not available, an empty string is returned.
Syntax:
-------
infotag get leg_remoteipaddress <leg-id>
 
Thanks,
Anusha

Subject: RE: TCL 911 script added with IP-address of calling phone
Replied by: JAMES DEPHILLIP II on 25-10-2010 01:30:56 PM
How can I get the IP Address of a calling phone on a CallManager cluster that is trunked to the gateway?

Subject: RE: TCL 911 script added with IP-address of calling phone
Replied by: Yaw-Ming Chen on 22-11-2010 10:20:45 PM
We are only talking about protocals here(SIP,SCCP...ect), as long as you can make something communicate with CME. If you can make something ring phone registered on CME or passing router as voice gateway to 3rd party destination, you can trigger Tcl IVR script in Cisco Voice Gateway.
 
Thanks !

Subject: RE: TCL 911 script added with IP-address of calling phone
Replied by: Pawel Bialoszewski on 22-11-2010 10:15:12 PM
Sorry to interrupt your topic, but reading this one I'm wondering if istead of Ip phone you can add PC with some appropriate software?