cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
924
Views
0
Helpful
0
Comments
cdnadmin
Community Member
This document was generated from CDN thread

Created by: Kiran Oddiraju on 26-10-2011 01:52:22 PM
Hi guys,
 
I'm trying to run a tcl script that plays a greeting and transfers the call to a hunt group. Inbound call is received on a SIP trunk on g711alaw and an inbound dial-peer picks up the call and runs the aa application. Call is actually getting dropped when the tcl tries to open the .au file.
 
Here's the error message:
 
Oct 26 17:21:33.718: //83//MSM :/ms_asDone_buginf: Stream Association Failed: Requested codec=0x5=g711ulaw, Negotiated codec=0x6=g711alaw
Oct 26 17:21:33.718: //-1//AFW_:/AFW_Module_ParseHandle: ERROR: Separator not found
Oct 26 17:21:33.722: //-1//AFW_:/AFW_Util_CopyLegServiceCodeToCallInfoContainer: Service Code not available on Leg
Oct 26 17:21:33.722: //-1//AFW_:/AFW_Util_CopyLegRouteCodeToCallInfoContainer: Route Code not available on Leg
Oct 26 17:21:33.722: //-1//AFW_:/AFW_Util_GetTgCicValue: CIC Not  found for tag(56)
Oct 26 17:21:33.722: //-1//AFW_:/AFW_Util_CopyMLPPDataToCallInfoContainer: Voice MLPP not configured
Oct 26 17:21:33.722: //-1//AFW_:/AFW_Util_CopyMLPPDataToCallInfoContainer: Voice MLPP not configured
Oct 26 17:21:33.722: //-1//AFW_:/AFW_Util_CopyMLPPDataToCallInfoContainer: Voice MLPP not configured
Oct 26 17:21:33.722: //-1//AFW_:/AFW_Util_GetUsrContainerData: Container is present, No data
Oct 26 17:21:33.722: //-1//AFW_:/AFW_Util_RemovePreemptInfoFromContainer: Failed to remove mlppSetupInfo from TD container
Oct 26 17:21:34.018: %CALL_CONTROL-6-CALL_LOOP: The incoming call has a global identifier already present in the list of currently handled calls. It is being refused.

Subject: RE: TCL error
Replied by: Yaw-Ming Chen on 26-10-2011 02:18:11 PM
I think your audio file is g711u try to use g711a audio file see if it helps.

Oct 26 17:21:33.718: //83//MSM :/ms_asDone_buginf: Stream Association Failed: Requested codec=0x5=g711ulaw, Negotiated codec=0x6=g711alaw


Subject: RE: TCL error
Replied by: Kiran Oddiraju on 31-10-2011 09:13:28 AM
it was indeed codec issue, I converted the greeting to g711alaw and it now works fine. I have used the attached tcl script to play a greeting for an inbound call and forward it to a hunt group.
 
Thanks,
Kiran
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links