on 01-24-2014 01:56 AM
Are you using tomcat? If so, Why don't u enable debug on tomcat. It will give you additional message/details.
Ok, just add this to your web.xml file :
<init-param>
<param-name>Debug</param-name>
<param-value>on </param-value>
</init-param>
________________________________
From: Cisco Developer Community Forums [[email protected]]
Sent: Thursday, July 22, 2010 12:16 PM
To: [email protected]
Subject: New Message from Luca Galluppi in Customer Voice Portal (CVP) - General Discussion - All Versions: RE: VXML_SERVER_OTHER_ERROR
Luca Galluppi has created a new message in the forum "General Discussion - All Versions":
--------------------------------------------------------------
Ok, just set the debug flag to on in web.xml file in tomcat. Let me know, if you have any questions
can you past your file with debug configuration active.
--
To respond to this post, please click the following link:
<http://developer.cisco.com/web/cvp/forums/-/message_boards/message/2378618>
or simply reply to this email.
Ok, just set the debug flag to on in web.xml file in tomcat. Let me know, if you have any questions
Did you restart tomcat. Without restart the effect will not take place.
Thanks,
Hemal
Sr Call Center Architect
Aprroach IT inc
________________________________
From: Cisco Developer Community Forums [[email protected]]
Sent: Friday, July 23, 2010 1:50 AM
To: [email protected]
Subject: New Message from Luca Galluppi in Customer Voice Portal (CVP) - General Discussion - All Versions: RE: New Message from Luca Galluppi in Customer Voice Portal (CVP) - General
Luca Galluppi has created a new message in the forum "General Discussion - All Versions":
--------------------------------------------------------------
Ok, just add this to your web.xml file :
<init-param>
<param-name>Debug</param-name>
<param-value>on </param-value>
</init-param>
________________________________
From: Cisco Developer Community Forums [[email protected]]
Sent: Thursday, July 22, 2010 12:16 PM
To: [email protected]
Subject: New Message from Luca Galluppi in Customer Voice Portal (CVP) - General Discussion - All Versions: RE: VXML_SERVER_OTHER_ERROR
Luca Galluppi has created a new message in the forum "General Discussion - All Versions":
--------------------------------------------------------------
Ok, just set the debug flag to on in web.xml file in tomcat. Let me know, if you have any questions
can you past your file with debug configuration active.
--
To respond to this post, please click the following link:
<http://developer.cisco.com/web/cvp/forums/-/message_boards/message/2378618>
or simply reply to this email.
this is my file, but i don't see any change on the logs: what is wrong?
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
<servlet>
<servlet-name>default</servlet-name>
<servlet-class>org.apache.catalina.servlets.DefaultServlet</servlet-class>
<init-param>
<param-name>debug</param-name>
<param-value>on</param-value>
</init-param>
<init-param>
<param-name>listings</param-name>
<param-value>false</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
--
To respond to this post, please click the following link:
<http://developer.cisco.com/web/cvp/forums/-/message_boards/message/2377505>
or simply reply to this email.
Which logs are u looking at ? It will produce new set of logs. Look under tomcat logs dir. Do not look at acitvity logs.
________________________________
From: Cisco Developer Community Forums [[email protected]]
Sent: Friday, July 23, 2010 7:28 AM
To: [email protected]
Subject: New Message from Luca Galluppi in Customer Voice Portal (CVP) - General Discussion - All Versions: RE: New Message from Luca Galluppi in Customer Voice Portal (CVP) - General
Luca Galluppi has created a new message in the forum "General Discussion - All Versions":
--------------------------------------------------------------
i restart VXML server and i change the file on CISCO\CVP\VXMLServer\Tomcat\conf
Did you restart tomcat. Without restart the effect will not take place.
Thanks,
Hemal
Sr Call Center Architect
Aprroach IT inc
________________________________
From: Cisco Developer Community Forums [[email protected]]
Sent: Friday, July 23, 2010 1:50 AM
To: [email protected]
Subject: New Message from Luca Galluppi in Customer Voice Portal (CVP) - General Discussion - All Versions: RE: New Message from Luca Galluppi in Customer Voice Portal (CVP) - General
Luca Galluppi has created a new message in the forum "General Discussion - All Versions":
--------------------------------------------------------------
Ok, just add this to your web.xml file :
<init-param>
<param-name>Debug</param-name>
<param-value>on </param-value>
</init-param>
________________________________
From: Cisco Developer Community Forums [[email protected]]
Sent: Thursday, July 22, 2010 12:16 PM
To: [email protected]
Subject: New Message from Luca Galluppi in Customer Voice Portal (CVP) - General Discussion - All Versions: RE: VXML_SERVER_OTHER_ERROR
Luca Galluppi has created a new message in the forum "General Discussion - All Versions":
--------------------------------------------------------------
Ok, just set the debug flag to on in web.xml file in tomcat. Let me know, if you have any questions
can you past your file with debug configuration active.
--
To respond to this post, please click the following link:
<http://developer.cisco.com/web/cvp/forums/-/message_boards/message/2378618>
or simply reply to this email.
this is my file, but i don't see any change on the logs: what is wrong?
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
<servlet>
<servlet-name>default</servlet-name>
<servlet-class>org.apache.catalina.servlets.DefaultServlet</servlet-class>
<init-param>
<param-name>debug</param-name>
<param-value>on</param-value>
</init-param>
<init-param>
<param-name>listings</param-name>
<param-value>false</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
--
To respond to this post, please click the following link:
<http://developer.cisco.com/web/cvp/forums/-/message_boards/message/2377505>
or simply reply to this email.
--
To respond to this post, please click the following link:
<http://developer.cisco.com/web/cvp/forums/-/message_boards/message/2379673>
or simply reply to this email.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: