cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Decrypt Security Password Voice applications namely CUCM/UCCX/CUC

4435
Views
50
Helpful
5
Comments
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages. 
 
1) Login into the CLI of the Publisher.
 
2) Run the command "utils create report platform"
 

cli.png
 
3) Download the platform config file from the path given in the output of the command to a SFTP server (eg:freeftpd)
 
cli2.png
 
4) Extract the file you downloaded, the platformconfig file would be in the path usr\local\platform\conf
 
5) Download UCOS Password Decrypter tool from  https://www.adhdtech.com/uctools.html#ucosPD
 
cli3.png
 
6) Hit select file and select the platformConfig file from usr\local\platform\conf
 
7) And viola you have your passwords decrypted.
 

Comments

Thanks Aeby. It was helpful.

Beginner

How to configure the sftp server ? In DRS or via CLI we need to create again ?

Participant

you can setup any SFTP server and fill in the details of the server (ip address, username, password etc) when you are prompted to do the same once you put in the file get command from the cli.

Beginner

Thanks for your prompt reply it was really helpful.

Beginner

Hello Aeby,

 

It is Helpful.

Thanks for sharing.

 

regards,

Harsh 

CreatePlease to create content
Ask the Expert- Webex Hybrid Services Solutions