Low Latency Queueing (LLQ) is the key prioritization technique for enabling voice and data integration.
To configure Low Latency Queueing (LLQ), perform these steps:
Create a class map for Voice over IP (VoIP) traffic, and define a match criteria.
Create a class map for VoIP signaling, and define a match criteria (optional).
Create a policy map, and associate it to the VoIP class maps.
Enable LLQ by applying the policy map to the outbound WAN interface.
These documents provide useful information on Configuring Class-Based Weighted Fair Queuing (CBWFQ) and LLQ. They also provide a number of other good sources on configuring Quality of Service (QoS) for voice:
I am attempting to write some scripts in C# that will take advantage of the UCCE 11.6 Rest API. In particular, I am looking to do bulk agent creation. I am able to successfully connect to the remote server where UCCE lives, but when I try to se...
We are installing a voice gateway (ISR4351) with E1, and the device is comunicated with CUCM through SIP trunk. The calls from IPPhones are coming to the device, but when te call is transferred to E1 through dial-peers, the call is not working. These are ...
Hello colleagues! Possibly after Firmware reset of С40 the microphone from the kit stopped working. We've tried another mic, cable, port - nothing is working. Another problem is that I have only remote access to the C40. Could you please tell m...
Hi all, CST-SX20N-K9 normal controlled by TRC6 only on a short distance (about 1-1.5 meters). At longer distance the SX20 is poorly controlled or completely out of control. SX20 has latest CE8 firmware version - 8.3.7 Does anyone have...