Use the Cisco IP Communications Express Quick Configuration Tool (QCT) to quickly set up the Cisco CallManager Express and Cisco Unity Express. The QCT application, as an HTML-based Java Script program, runs on the user's workstation using Microsoft Internet Explorer (IE). The QCT application, through its user-friendly Graphical User Interface (GUI), prompts the user for the common parameters needed to configure the Cisco Integrated Services router to support a complete IP telephony solution.
Version support-QCT supports these versions of Cisco IOS Software, Cisco CallManager Express, and Cisco Unity Express:
Cisco CallManager Express version 3.2 using Cisco IOS Software 12.3(11)T6 and later
Cisco Unity Express version 2.1.0 and later
Hardware support-QCT can configure Cisco CallManager Express telephony services on any Cisco router that supports Cisco IOS Software Release 12.3(11)T6 and later and Cisco Unity Express version 2.1.0 and later. This includes all the Cisco integrated services routers (Cisco 2800 and 3800 series), as well as the earlier generation of Cisco access routers (Cisco 1700, 2600 and 3700 series).
We recently had to move from an ISDN Hand-Off to a SIP Based Service from T-Mobile called Company FlexI was able to find a guide from another post, https://community.cisco.com/kxiwq67737/attachments/kxiwq67737/discussions-uc-infrastructure/168390/1/Teleko...
HelloWe're observing on our UCCX 12.5 very long Reserved state (about 20 seconds) and during this time the client is waiting for the response of the operator on the other side (previously the system was in this status for about 1 second)Please tell me wha...
I have a few question regarding CUIC report.
I have two types of reports, one is normal skill group and another one is enterprise skill group.
When I compare these two reports I could see abandoned count for these two reports are not s...
I just performed a firmware migration following the steps given on Cisco Cloud Upgrader. The firmware migration process was for Enterprise to MPP for Broadworks and other 3PCC manual migration using TFTP Server 1 set to 184.108.40.206. The fir...
Hi, What are the firewall required ports for wifi-calling?I've found old article that stated: UDP ports 500, 4500, and TCP 143 ports but not sure if there are all ports that need to be allowedWe have restricted internet breakout for the vis...