RESTCONF API through Postman - ISR 4000

[Tamirm]

Hi guys,

I've ISR 4331/K9 and trying to get some data about the route table.

In the router i perform restconf and ip http server commands, and the cisco webui works well.

moreover in the "show platform software yang process" i saw nginx running state

when im trying to send GET message through Postman application i always received "404 error" message.

moreover i added the ssh user&password to the Postman application.

my ISR version is 16.6.4

Can someone knows how to resolve this issue?

a screenshot of wireshark follow and Postman application is attach.

[bigevilbeard]

Looks like you are missing https:// from the URI there. For example.

https://{{host}}/restconf/data/ietf-interfaces:interfaces-state/

[Tamirm]

When i do that i get SSL error

[bigevilbeard]

Getting closer! Make sure you disable SSL certificate verification in Postman's settings.
To disable SSL certificate verification go to Settings, click on switcher as in the screenshot below

[Tamirm]

Not works yet, screen shot attach

[bigevilbeard]

Did you restart Postman after turning off the SSL certificate verification in Postman's settings? Could you confirm your auth/headers (please do not share your password) Here i am using the always-on CSR devnet sandbox. You can give this a try and see if this works for you.

CSR1000v Host: sandbox-iosxe-latest-1.cisco.com
RESTCONF Ports: 443 (HTTPS)
Username: developer
Password: C1sco12345

https://sandbox-iosxe-latest-1.cisco.com/restconf/data/Cisco-IOS-XE-device-hardware-oper:device-hardware-data

Content-Type = application/yang-data+json
Accept = application/yang-data+json

[Tamirm]

When i perform this GET to your cloud router its works well, but mine not...

[bigevilbeard]

Have a look at this guide to enabling Resconf on XE platforms https://developer.cisco.com/docs/ios-xe/#!enabling-restconf-on-ios-xe/authentication

Hope this helps!

[Tamirm]

Thanks,

Finally I updated my version to 16.12.04 and now it works well

[bigevilbeard]

Awesome!

[omz]

please consider accepting the solution and closing the question so it does not show up as unanswered and others with similar issues can benefit from your post thanks