Virtual router CSR1000v restarts

[josorio_]

When I try to do lab 7.0.3 of the Networking Academy DevNet Associate course, the virtual router CSR1000v starts to boot and upon reaching the line:
    [isord@0x7106b000, 0xef84000 bytes]
the router reboots and starts booting again, entering an endless loop
Has anyone had a similar problem?
I have all the virtualization features enabled in my UEFI/BIOS.

[bigevilbeard]

@josorio_ as this environment is linked to a course, i would suggest asking for support here https://www.netacad.com/support

[josorio_]

OKAY. I will try that way.

Thanks.