06-13-2022 04:18 AM
Hello,
could you please provide some snmpset commands to add, modify and delete vlan table entries on CBS350-16T-2G switches?
I can create VLAN
SNMPv2-SMI::mib-2.17.7.1.4.3.1.5.3 = INTEGER: 4 (create and go)
SNMPv2-SMI::mib-2.17.7.1.4.3.1.1.3 = STRING: "vlan3" (vlan name)
to add port 3 to vlan3 I used this OID's but it doesn't work
SNMPv2-SMI::mib-2.17.7.1.4.3.1.2.3 = Hex-STRING: “0x20” (This is bit map representation of ports on device in HEX format, and have to fill something even for 0)
SNMPv2-SMI::mib-2.17.7.1.4.3.1.3.3 = Hex-STRING: “0x00” (This field has the same definition as static field)
SNMPv2-SMI::mib-2.17.7.1.4.3.1.4.3 = Hex-STRING: “0x20” (This field has the same definition as static field)
Thanks
06-13-2022 05:12 AM
check this thread may help you :
06-13-2022 08:37 AM
don't work for CBS350
06-14-2022 02:26 AM
They are same SMB switches, if not working, contact Cisco SMB TAC see if that supported what you looking to do.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide