Dear ALL：
My old CSS 11155 Switch has error messg. when boot...
from Diag port show that:
28 NVRAM Data Bus ------------------------------------- (01)-ERROR
>>FAILURESTART ***************************************
Fault Environment: ModType:SCFM
Device#18 Test#28 Iteration#1 Error#960
Failed Test: NVRAM Data Bus
Details:
Failed 8-bit access. Addr: 0xb5000000: Walking 1 pattern: Expected: 0x1 Actual: 0x24
>>FAILUREEND ***************************************
and from console port:
BootRom...booting
Copyright 1998 (c), Cisco Systems, Inc
Locked boot flash.
Validating operational boot flash, please wait...
Operational boot flash valid. Jumping to operational boot flash.
Copyright 1998 (c), Cisco Systems, Inc
Operational boot flash.
Version 6.10 Build 203
PN: 073-05857-04 Rev: A0.0 SN: PL505500718
Running POST Diagnostics
<2><3><4><6><7><8><12><14><15><28> DIAG FAILURE: Device #18, Test #28, Error #960
<31><32><33><34><38><44><45><46><48><49><76><78><96><99><101><103><105><107>
<109><111><113><115><117><119><121><187><188><190><192><194><196><198><200>
<202><203><204><206>
POST Diagnostics FAILED: First error encountered: 960
Press <CR> to continue booting, or 'r' to restart system:
Booting into Offdm image at 0xbfd80000
Reading configuration records...NVRAM Device Test failure @ 3266
FAILED
Checking previous shutdown..UNKNOWN
Initializing the disk...OK
CSS 11150 Offline Diagnostic Monitor menu, Version: 6.10 Build 203
M A I N M E N U
Enter the number of a menu selection:
1* Set Boot Configuration
2. Show Boot Configuration
3* Advanced Options
4. Reboot System
******************************************************************************************************************
I think about the error mean NVRAM!!!
and the setting won't storage when rebbot,...
Someone could tell me how to fix it?
Thx a lot!
