Introduction
This document shows how to configure the UCS fc module in fc switch mode. Configurations are provided for both the UCS side and Cisco MDS side. Included are configurations to create trunk and port-channels between the UCS fc module and MDS. Direct attach storage configuration is included. Discussion on default zoninfg and zoning from an attached MDS switch.
VOD is availanle at:https://supportforums.cisco.com/videos/1718
Please provide feedback to help us improve this type of delivery in the future.
Related Information
Implementing PVLAN Feature on UCS 1.4.1
MAC Sync feature in UCS 1.4.1
