I am also trying to create a vPC on the downlink ports of the FEX. From the documentation I see its possible on the 5K. Is this possible on the 7K also? I am using version 5.1(2).
for example f I want to connect one host to one port in a nexus 2 K for example in port 117/1/1 and the another host in port 117/1/48. This Nexus 2K has 2 uplink to tow nexus 5K different, everythings is inside a vPC between the two nexus 5k. I configured the ports access on 2248 like tradicionally access port en catalyst switch but it does not work. Can you tell me if is correct or not ?
The only way that I can do that it´s working it was:
I configured a portchannel 1 inside de eth 117/1/1 and another portchannel 2 in eth 117/1/48. After that inside the portchannel I configured like access port and I assigned the vlan. then I checked the sh run int eth 117/1/1 or 48 and Automatically was assigned to the vlan that I configured inside the portchannel. It was the only way to bring up the acces port on nexus 2248 and have connectivity between host.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: