I have two 93180YC-EX switch configured as vpc . running as leaf switch connect to spine swtich
I found weird problem
I can find 1535 host routes on two leaf switches,
but one leaf1 we can find most host routes put into host trie route
Total number of IPv4 host trie routes used : 1419 <-------
Total number of IPv4 host tcam routes used : 116
Total number of IPv4 LPM trie routes used : 355
Total number of IPv4 LPM tcam routes used : 2243
but on leaf 2 we can find all ipv4 host routes put into tcam routes
Total number of IPv4 host trie routes used : 0
Total number of IPv4 host tcam routes used : 1535
Total number of IPv4 LPM trie routes used : 0
Total number of IPv4 LPM tcam routes used : 2598
so afftect ipv4 tcam ultilization,on leaf1 switch only 38.39% ipv4 tcam ultilization
Percentage utilization of IPv4 TCAM routes : 38.39
but on leaf2 switch increase to 67.26%
Percentage utilization of IPv4 TCAM routes : 67.26
two leaf switch running into vpc , ecmp routes to spine,
I want to know what afftect ipv4 tcam ultiliazation , what affect host route put into ipv4 tcam or host trie route?
thank you
TOm
