Hi @omkarpol41
As far as I know, you cannot generate traps based on counter checks. The SNMP traps usually are generated based on events.
The available config for interface related SNMP traps is:
snmp-server enable traps link [cieLinkDown] [cieLinkUp ] [cmn-mac-move-notification ] [IETF-extended-linkDown ] [IETF-extended-linkUp ] [cisco-extended-linkDown ] [cisco-extended-linkUp ][linkDown ] [linkUp]
Also, here is are the default enabled traps:
| Trap Type |
Description |
| generic |
: coldStart |
| entity |
: entity_fan_status_change |
| entity |
: entity_mib_change |
| entity |
: entity_module_status_change |
| entity |
: entity_module_inserted |
| entity |
: entity_module_removed |
| entity |
: entity_power_out_change |
| entity |
: entity_power_status_change |
| entity |
: entity_unrecognised_module |
| link |
: cErrDisableInterfaceEventRev1 |
| link |
: cieLinkDown |
| link |
: cieLinkUp |
| link |
: cmn-mac-move-notification |
| link |
: delayed-link-state-change |
| link |
: extended-linkDown |
| link |
: extended-linkUp |
| link |
: linkDown |
| link |
: linkUp |
Ref: https://www.cisco.com/c/en/us/td/docs/dcn/nx-os/nexus9000/102x/configuration/system-management/cisco-nexus-9000-series-nx-os-system-management-configuration-guide-102x/m-configuring-snmp-10x.html
Stay safe,
Sergiu
