pecify the source interface for informs and traps if the management VRF instance is not being used. This allows security devices such as firewalls to identify the source of the SNMP packet. If the source interface or IP address is not specified the primary IP address on the originating (outbound) interface is selected. The inform feature only applies to SNMP v2c and v3. You can configure the source interface globally for all SNMP hosts or per SNMP host.
n7000(config)# snmp source-interface informs loopback0 n7000(config)# snmp source-interface traps loopback0 Per Server Configuration:
Join us live on Thursday, April 8 at 10 am PT (and on demand after) as we join Cisco and HashiCorp executives to discuss the importance of IaC automation, Intersight Service for Terraform, and how to better manage hybrid cloud infrastructure at scale...
Join us live on Thursday, April 8 at 10 am PT (and on demand after) where Cisco and HashiCorp executives will discuss the importance of IaC automation, Cisco Intersight Service for Hashicorp Terraform, and how to better manage hybrid cloud infrastructure...
How to START with Infrastructure as a code for Cisco Cloud Solutions
ACI Ansible Modules Documentation Guide
Cisco Collections on Ansible Galaxy
Cisco DevNet Learning Labs
DevNet Introduction to ACI and Ansible
DevNet Introduction to ACI a...
Here's how to get notified about Cisco software releases, like the Application Policy Infrastructure Controller (APIC) (APIC Software)
Go to software.cisco.com - where you download all Cisco software
Select Software Download