09-18-2009 03:29 AM
Hi,
I had VSM & VEM setup running, but VM running on VEM have no network connectivity.
There are two vmnics on VEM, vmnic0 and vmnic1.
vmnic1 is assigned port-profile system-uplink and Virtual NIC on VM is assigned port-profile vmdata103.
What could be the problem related to this issue?
show port-profile usage
--------------------------------------------------------------------------------
Port Profile Port Adapter Owner
--------------------------------------------------------------------------------
system-uplink Eth3/2 vmnic1 esxi102
vmdata103 Veth1 Net Adapter 1 esxi - 102 - xpsp3
port-profile system-uplink
description:
status: enabled
capability uplink: yes
capability l3control: no
system vlans: none
port-group: system-uplink
max-ports: -
inherit:
config attributes:
switchport mode trunk
switchport trunk allowed vlan 1,101-103
no shutdown
evaluated config attributes:
switchport mode trunk
switchport trunk allowed vlan 1,101-103
no shutdown
assigned interfaces:
Ethernet3/2
port-profile vmdata103
description:
status: enabled
capability uplink: no
capability l3control: no
system vlans: none
port-group: vmdata103
max-ports: 32
inherit:
config attributes:
switchport mode access
switchport access vlan 103
no shutdown
evaluated config attributes:
switchport mode access
switchport access vlan 103
no shutdown
assigned interfaces:
Vethernet1
Thanks,
D V
09-21-2009 09:56 PM
Hi D V,
Can you please give the OP of the following cmds from the VSM:
- module vem 3 execute vemcmd show port
- module vem 3 execute vemcmd show trunk
- show interface brief
- Also, inside the VM, is the nw adaptor programed properly and what are you trying to connect to, gateway IP? (ifconfig eth0/eth1 shows proper OP)
Thanks,
Vinutha
09-21-2009 10:29 PM
Have you created VLAN 103 on the 1000v & Upstream switches your VEM connects to?
On both switches do a "show vlan" and if you don't see VLAN 103 - thats your issue.
Robert
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide