CML bridge mode for subnet other than CML SUBNET range

[akshayj2097]

Hi,

I am using CML with external connector in bridge mode. I am able to connect outside network when my virtual device ip is in the same subnet of CML server. But I want to configure devices which are on different network and connect them with my network. So how it can be done? what are the commands to connect internal topology devices to outside network? Please help.

[Alexander Stevenson]

Hi @akshayj2097,

The documentation I found for how to do this seems relatively old but may still be helpful.

External Connectivity in Cisco Modeling Labs

https://www.cisco.com/c/en/us/td/docs/cloud_services/cisco_modeling_labs/v100/configuration/guide/b_cml_user_guide/b_cml_user_guide_chapter_0111.pdf

I also found this external video, which may be helpful.

Cisco CML External Connectivity | Cisco CCNA 200-301

https://www.youtube.com/watch?v=jk_0T3ge50c

See the section 'Game plan for connectivity, routing, and NAT', beginning at 20:00.

I hope this helps!

[Ruben Cocheno]

@akshayj2097 

Just following up on this and see if you still need help?