Accepted Solutions
@slarrarte we are talking about a different sandbox. I made reservation today and was able to access the following devices with the username developer/C1sco12345
IOS XE Cat 8Kv-569667f1/10.10.20.48/Model Catalyst 8000v
❯ ssh developer@10.10.20.48
(developer@10.10.20.48) Password:
Welcome to the DevNet Sandbox for Cat8000V and IOS XE
The following programmability features are already enabled:
-NETCONF
-RESTCONF
Thanks for stopping by.
cat8000v#
❯ ssh developer@10.10.20.35
(developer@10.10.20.35) Password:
RP/0/RP0/CPU0:xrv9k
I could also access the devbox with same username/password (not shown)
However the NX-OS device, did not take the username/password listed in the left side device details. At first i thought this was a local issue, and used the devbox as a jump host. But access was denied again. Under further looking, i expanded the the command tab on the device in the topology, this looks like a play button.
If you click this, it will expand a pane on the right side of the diagram. Under attributes, you see more of the device information and can see that the username/password details are not the same as those provided in other section.
Once those details are used, access to the device is possible. (admin/RG!_Yw200) both local and using the devbox as a jump host.
❯ ssh admin@10.10.20.40
User Access Verification
(admin@10.10.20.40) Password:
Cisco NX-OS Software
Copyright (c) 2002-2020, Cisco Systems, Inc. All rights reserved.
Nexus 9000v software ("Nexus 9000v Software") and related documentation,
files or other reference materials ("Documentation") are
the proprietary property and confidential information of Cisco
Systems, Inc. ("Cisco") and are protected, without limitation,
pursuant to United States and International copyright and trademark
laws in the applicable jurisdiction which provide civil and criminal
penalties for copying or distribution without Cisco's authorization.
Any use or disclosure, in whole or in part, of the Nexus 9000v Software
or Documentation to any third party for any purposes is expressly
prohibited except as otherwise authorized by Cisco in writing.
The copyrights to certain works contained herein are owned by other
third parties and are used and distributed under license. Some parts
of this software may be covered under the GNU Public License or the
GNU Lesser General Public License. A copy of each such license is
available at
http://www.gnu.org/licenses/gpl.html and
http://www.gnu.org/licenses/lgpl.html
***************************************************************************
* Nexus 9000v is strictly limited to use for evaluation, demonstration *
* and NX-OS education. Any use or disclosure, in whole or in part of *
* the Nexus 9000v Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
***************************************************************************
n9k#
I check the devices attributes on the other devices (XE and XR) and see they match both sides as developer/C1sco12345, which worked ok. The Nexus information is wrong, but once using the right details this seems ok for me, i am not sure why you are not able to access he XR device. The XRv9 can take a while to boot fully and if not fully loaded up might/could reject your password or there might have been a build error with your reservation. I would suggest, getting a new reservation, double check the passwords being entered from both sources of information in the sandbox and type these in, rather than copy/pasta.
Hope this helps.
I am inquiring about the reservable sandbox specifically. I have attached a screenshot of it, which shows that there is one device per OS. The instruction sidebar also provides credentials (which don't work for XR and NX) for each node.
@slarrarte we are talking about a different sandbox. I made reservation today and was able to access the following devices with the username developer/C1sco12345
IOS XE Cat 8Kv-569667f1/10.10.20.48/Model Catalyst 8000v
❯ ssh developer@10.10.20.48
(developer@10.10.20.48) Password:
Welcome to the DevNet Sandbox for Cat8000V and IOS XE
The following programmability features are already enabled:
-NETCONF
-RESTCONF
Thanks for stopping by.
cat8000v#
❯ ssh developer@10.10.20.35
(developer@10.10.20.35) Password:
RP/0/RP0/CPU0:xrv9k
I could also access the devbox with same username/password (not shown)
However the NX-OS device, did not take the username/password listed in the left side device details. At first i thought this was a local issue, and used the devbox as a jump host. But access was denied again. Under further looking, i expanded the the command tab on the device in the topology, this looks like a play button.
If you click this, it will expand a pane on the right side of the diagram. Under attributes, you see more of the device information and can see that the username/password details are not the same as those provided in other section.
Once those details are used, access to the device is possible. (admin/RG!_Yw200) both local and using the devbox as a jump host.
❯ ssh admin@10.10.20.40
User Access Verification
(admin@10.10.20.40) Password:
Cisco NX-OS Software
Copyright (c) 2002-2020, Cisco Systems, Inc. All rights reserved.
Nexus 9000v software ("Nexus 9000v Software") and related documentation,
files or other reference materials ("Documentation") are
the proprietary property and confidential information of Cisco
Systems, Inc. ("Cisco") and are protected, without limitation,
pursuant to United States and International copyright and trademark
laws in the applicable jurisdiction which provide civil and criminal
penalties for copying or distribution without Cisco's authorization.
Any use or disclosure, in whole or in part, of the Nexus 9000v Software
or Documentation to any third party for any purposes is expressly
prohibited except as otherwise authorized by Cisco in writing.
The copyrights to certain works contained herein are owned by other
third parties and are used and distributed under license. Some parts
of this software may be covered under the GNU Public License or the
GNU Lesser General Public License. A copy of each such license is
available at
http://www.gnu.org/licenses/gpl.html and
http://www.gnu.org/licenses/lgpl.html
***************************************************************************
* Nexus 9000v is strictly limited to use for evaluation, demonstration *
* and NX-OS education. Any use or disclosure, in whole or in part of *
* the Nexus 9000v Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
***************************************************************************
n9k#
I check the devices attributes on the other devices (XE and XR) and see they match both sides as developer/C1sco12345, which worked ok. The Nexus information is wrong, but once using the right details this seems ok for me, i am not sure why you are not able to access he XR device. The XRv9 can take a while to boot fully and if not fully loaded up might/could reject your password or there might have been a build error with your reservation. I would suggest, getting a new reservation, double check the passwords being entered from both sources of information in the sandbox and type these in, rather than copy/pasta.
Hope this helps.
