Cisco CSR1000v log in issue

[gtrzosek]

Using DenNet Sandbox and can spin and log in any devices apart from CSR1000v. Any idea why?

[zowu]

Hi,

Are you using VIRL topology file from https://github.com/virlfiles? I've tried https://github.com/virlfiles/genie_learning_lab and CSR1000v console access is ok here.

[gtrzosek]

Hi , Thank you so much for a quick replay. Same issue - can log into Nexus NX-OS but for the CSR1000v cant get only blinking cursor, no output from the console.

[zowu]

Hi,

You can telnet to "Management IP" once the simulation is active. But your active "Management IP" is in subnet 10.255.0.0/24 other than 172.16.30.0/24 we physically configured.  Please check your topology.virl settings or try one from https://github.com/virlfiles/

[gtrzosek]

Hi, Already tried that topology from GitHub, and it seems only that one node - csr1000v is affected, other nodes are working fine. Got confused and have no idea where the issue lies.  I am using AnyConnect to reach DevNet Sandbox, and all other nodes works fine.

Tried the same topology on local virl and no problems there. Any suggestions?

Thank you in advance.

[zowu]

Got same error while connecting 10.10.20.160:1700x directly, but it is working against telnet 172.16.30.63. No idea is it a CSR1000v limitation or not.

Trying 172.16.30.63...
Connected to 172.16.30.63.
Escape character is '^]'.
User Access Verification

Username: cisco
Password:
csr1000v-1#

[gtrzosek · Accepted solution]

Hi, You are right - using telnet and topology from GitHub  I can log in into the CSR1000v.