Hi,
I just ran up the sandbox called Cisco SD-WAN 19.2 Sandbox and it got errors during the build. Below is the log. I know the fix is likely a remove and rebuild so will try that now, but wanted to post incase others are getting this error on reservable sandboxes.
01:52:13 Environment Driver Setup has begun
Beginning sandbox setup
Preparing connectivity
Apps deployment started
Apps are being discovered...
Connecting all apps
Apps are powering on...
Waiting for apps IP addresses, this may take a while...
No apps to configure
Sandbox setup finished successfully
01:55:09 Just a moment - a few more things left to setup...
01:55:31 Setting POD Internet access policy
01:55:37 Waiting 4 minutes for all systems be become fully ready
01:59:41 Calling Setup on applicable resources
02:00:04 Beginning Setup for resource [Cisco Modeling Labs_b540-0e70]
02:00:04 Beginning Setup for resource [DevBox_9344-0e70]
Setting up Network policy
Done
Network Setup Complete!!!
02:01:16 Completed Setup for resource [DevBox_9344-0e70]
02:18:16 <font color="red">Errors reported during Setup for resource [Cisco Modeling Labs_b540-0e70] </font>
02:18:19
ERROR detected when calling Resource Driver Command [Setup] for resource [Cisco Modeling Labs_b540-0e70].
Friendly Error Message: CML Setup Error from Resource:Cisco Modeling Labs_b540-0e70
Technical Error Message: BID/start -H "Authorization: Bearer $VIRL_TOKEN"_LA
{
"description": "Licensing issue: System not licensed.",
"code": 400
}[At Address:10.10.20.161
Error Location: UDC_RD_NSO_VIRLLicenseVIRL
02:18:28 None
02:18:28 Errors occurred preparing environment. Please use the forum at
https://communities.cisco.com/community/developer/sandbox for assistance
02:18:29 Driver Complete.
10.10.20.90
