Open NX-OS with Nexus 9Kv - Unable to reach any NX-OSV9K

ivoalmeida · ‎06-10-2020

I can't reach none of the NX-OSv9K switches in my lab. I'm unable to reach them from my own computer (using AnyConnect VPN) or from the DevBox through a SSH connection.

(venv) [developer@devbox sbx_nxos]$ping 172.16.30.101
PING 172.16.30.101 (172.16.30.101) 56(84) bytes of data.
From 10.10.20.160 icmp_seq=1 Destination Host Unreachable
From 10.10.20.160 icmp_seq=2 Destination Host Unreachable
From 10.10.20.160 icmp_seq=3 Destination Host Unreachable

(venv) [developer@devbox sbx_nxos]$virl ls --all
Running Simulations
╒══════════════╤══════════╤════════════════════════════╤═══════════╕
│ Simulation │ Status │ Launched │ Expires │
╞══════════════╪══════════╪════════════════════════════╪═══════════╡
│ ~jumphost │ ACTIVE │ 2018-08-02T19:21:08.764190 │ │
╘══════════════╧══════════╧════════════════════════════╧═══════════╛

I've already tried to virl up the lab, but after it I still have no nodes up:

(venv) [developer@devbox sbx_nxos]$virl nodes
Here is a list of all the running nodes
╒════════╤════════╤═════════╤═════════════╤════════════╤══════════════════════╤════════════════════╕
│ Node │ Type │ State │ Reachable │ Protocol │ Management Address │ External Address │
╞════════╪════════╪═════════╪═════════════╪════════════╪══════════════════════╪════════════════════╡
╘════════╧════════╧═════════╧═════════════╧════════════╧══════════════════════╧════════════════════╛

Can you help me please?

Regards

bigevilbeard · ‎06-10-2020

Hey there, take a look at this thread HERE sounds like the same issues.

Hope this helps.

Please mark this as helpful or solution accepted to help others
Connect with me https://bigevilbeard.github.io