05-03-2016 02:59 PM - edited 06-04-2019 02:24 AM
Sorry, for this newbie question:
Today, I had scheduled a APIC-EM__GA_HW-MiniLab-1. I could connect via VPN and I could access the network elements. I also found the login credentials how to log into the APIC-EM. However, although I was searching for it like a maniac, I have not succeeded to find the IP address or FQDN of the APIC EM. Neither in any of the emails, nor on any of following pages:
https://devnetsandbox.cisco.com/Docs/APIC_EM_GA_Minis/Sandbox-APIC-EM-GA-ML1.png
Here are also some screenshots I have taken, but all of them are missing the information I was looking for:
Isn't the APIC-EM included in the lab? Am I supposed to download the APIC-EM SW and install it on a 64 GB DRAM VM, as the installation specs say and then use it to discover the network?
Thanks for any hint to the right direction.
Best Regards,
Oliver
Solved! Go to Solution.
05-04-2016 01:32 AM
Your picture has helped me to figure out, what I am doing wrong. I have tried to reserve the lab again.
After reserving the lab, I was automatically redirected to the topology, which had shown the right IP address as in your screenshot. Then I had lost the Internet connection (going by train), and the topology was gone.
On https://devnetsandbox.cisco.com/RM/Topology, I have seen a note that the lab is "Currently reserved by me", but I did not know how to re-connect to the lab. Therefore, I had clicked the lab icon and I have reached at a topology without APIC-EM IP address:
Clicking the "Reserve" button did not make sense, since this will reserve the lab a second time.
Now, I have found how to re-connect to a reserved lab:
On https://devnetsandbox.cisco.com/RM/Topology, click on Reservations in the left pane and then on the green lab name:
This will lead you to the right topology and the APIC-EM IP address is displayed:
Okay, that was a newbie problem.
@yachwen: Thanks a lot for your helpful answer.
05-03-2016 03:43 PM
In this picture maybe ? (main page)
05-04-2016 01:32 AM
Your picture has helped me to figure out, what I am doing wrong. I have tried to reserve the lab again.
After reserving the lab, I was automatically redirected to the topology, which had shown the right IP address as in your screenshot. Then I had lost the Internet connection (going by train), and the topology was gone.
On https://devnetsandbox.cisco.com/RM/Topology, I have seen a note that the lab is "Currently reserved by me", but I did not know how to re-connect to the lab. Therefore, I had clicked the lab icon and I have reached at a topology without APIC-EM IP address:
Clicking the "Reserve" button did not make sense, since this will reserve the lab a second time.
Now, I have found how to re-connect to a reserved lab:
On https://devnetsandbox.cisco.com/RM/Topology, click on Reservations in the left pane and then on the green lab name:
This will lead you to the right topology and the APIC-EM IP address is displayed:
Okay, that was a newbie problem.
@yachwen: Thanks a lot for your helpful answer.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide