Question about accessing the IOS XE on CSR Latest Code AlwaysOn lab

[hikerguy]

This is an Always-on lab and says no reservation is required. The instructions are below. I tried just putting in the URL in my browser (adding :8181 at the end, as I saw with my private VPN on another lab I scheduled). No go. I did the same in AnyConnect.

Do they also need to provide a URL that is loaded in AnyConnect (like they do for the scheduled labs)???  It seems they're missing some detail in the explanations. 

##########################################

Developers and network engineers access the IOS XE on CSR Latest Code Always On Sandbox directly using the following information:

CSR1000V Host: ios-xe-mgmt-latest.cisco.com
SSH Port: 8181
NETCONF Port: 10000
RESTCONF Ports: 9443 (HTTPS)
Username: developer
Password: C1sco12345

[bigevilbeard]

For the always on SBX you can only access the ports that are open these are detailed in the instruction per sandbox, for example you would connect like

(venv) STUACLAR-M-R6EU:~ stuaclar$ ssh developer@ios-xe-mgmt-latest.cisco.com -p 8181
Password:

Welcome to the DevNet Sandbox for CSR1000v and IOS XE

The following programmability features are already enabled:
  - NETCONF
  - RESTCONF

Thanks for stopping by.



csr1000v-1>en
Password:
csr1000v-1#

Hope that helps. :)