07-04-2016 05:39 AM - edited 06-04-2019 02:25 AM
Hi Team,
Some i tried setting up iox setup..
but now i am unable to install and reach cartridges..
sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:153> ioxclient profiles show
Active Profile : sand
Profile Name : sand
Host IP: 11.1.1.102
Host Port: 8443
Auth Keys: cm9vdDpjaXNjbzEyMw==
Auth Token:
Api Prefix: /api/v1/
URL Scheme: https
sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:154>
sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:154> ./ioxclient cartridge list python27_yocto.tar.gz
Currently using profile : sand
Command Name: cartridge-list
Error processing command. Server returned 404
sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:155>
I have testbed where trying to setup iox deployement apps.
I am referring this file:///C:/Users/babelawa/Downloads/IR829%20PaaS%20and%20Container%20Style%20Applications%20Deployment%20Guide.pdf
But there are some issues related to configs
i am able to setup guest os with dhcp.
Here is details and configs:
IR800#sh iox host list de
IOX Server is running. Process ID: 265
Count of hosts registered: 1
Host registered:
===============
IOX Server Address: FE80::76A2:E6FF:FEFD:7DEC; Port: 22222
Link Local Address of Host: FE80::1FF:FE90:8B05
IPV4 Address of Host: 192.168.1.6
IPV6 Address of Host: fe80::1ff:fe90:8b05
Client Version: 0.4
Session ID: 4
OS Nodename: IR800-GOS-1
Host Hardware Vendor: Cisco Systems, Inc.
Host Hardware Version: 1.0
Host Card Type: not implemented
Host OS Version: 1.0.0.2
OS status: RUNNING
Interface Hardware Vendor: None
Interface Hardware Version: None
Interface Card Type: None
Applications Registered:
=======================
Count of applications registered by this host: 0
IR800#
But i am not able to reach to or ping to guest os from our local server.
IR800#sh run int gigabitEthernet 0
Building configuration...
Current configuration : 70 bytes
!
interface GigabitEthernet0
ip address 11.1.1.43 255.255.255.0
end
IR800#
IR800#
IR800#
IR800#sh run int gi
IR800#sh run int gigabitEthernet 5
Building configuration...
Current configuration : 151 bytes
!
interface GigabitEthernet5
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
ipv6 enable
end
IR800#
IR800#
IR800#sh run | s nat
! No destination mac-address configured
ip nat inside
ip nat outside
ip nat inside source list NAT_ACL interface GigabitEthernet0 overload
ip nat inside source static tcp 192.168.1.6 8443 interface GigabitEthernet0 8443
ip nat inside source static tcp 192.168.1.6 22 interface GigabitEthernet0 2222
IR800#
IR800#
IR800#sh run | s access
ip access-list standard NAT_ACL
permit 192.168.0.0 0.0.255.255
IR800#
IR800#
IR800#sh run | s route
default-router 192.168.1.1
ip route 0.0.0.0 0.0.0.0 10.78.106.129
ip route 192.168.223.0 255.255.255.0 192.168.1.6
IR800#
IR800#
IR800#sh run | s default
default-router 192.168.1.1
ip default-gateway 10.78.106.129
IR800#
IR800#
IR800#~
>
sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:222>
sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:222> ioxclient profiles show
Active Profile : ir
Profile Name : ir
Host IP: 192.168.1.6
Host Port: 8443
Auth Keys: cm9vdDpjaXNjbzEyMw==
Auth Token:
Api Prefix:
URL Scheme: https
sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:223>
sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:223>
sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:223> ioxclient install cartridge python27_yocto.tar.gz
Currently using profile : ir
Error processing command : Get https://192.168.1.6:8443/api/v1/hosting/tokenservice: dial tcp 192.168.1.6:8443: i/o timeout
sgbu-india-ucs2::/users/babelawa/ioxclient_linux_amd64:224>
Could you please help me here in setting up IOX.
Regards,
Balappa
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide