cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
950
Views
0
Helpful
3
Replies

The IOS XR sandbox is not working

khalilmeb
Level 1
Level 1

I have reserved the IOS XR Programmability Sandbox, but after the VPN connection, I could not access the routers.

 

Screenshot 2019-04-01 at 1.41.56 pm.pngScreenshot 2019-04-01 at 1.42.08 pm.png

3 Replies 3

Which port were you trying to ssh to please?

Please mark this as helpful or solution accepted to help others
Connect with me https://bigevilbeard.github.io

The VPN connection information which is sent via email, then I use the information access shown on the sandbox page. The SSH port given there is 2231

Hey there, i reserved a SBX just now and i can access the devices with the information/instructions in the sandbox

 

(venv) STUACLAR-M-R6EU:~ stuaclar$ ssh admin@10.10.20.170 -p 2221


--------------------------------------------------------------------------
  Router 1 (Cisco IOS XR Sandbox)
--------------------------------------------------------------------------


Password:


RP/0/RP0/CPU0:r1#exit
Connection to 10.10.20.170 closed by remote host.
Connection to 10.10.20.170 closed.
(venv) STUACLAR-M-R6EU:~ stuaclar$ ssh admin@10.10.20.170 -p 2231


--------------------------------------------------------------------------
  Router 2 (Cisco IOS XR Sandbox)
--------------------------------------------------------------------------


Password:


RP/0/RP0/CPU0:r2#

I tested the other ports here 

(venv) STUACLAR-M-R6EU:~ stuaclar$ nc -zc 10.10.20.170 8321
Connection to 10.10.20.170 port 8321 [tcp/*] succeeded!
(venv) STUACLAR-M-R6EU:~ stuaclar$ nc -zc 10.10.20.170 57021
Connection to 10.10.20.170 port 57021 [tcp/*] succeeded!
(venv) STUACLAR-M-R6EU:~ stuaclar$ nc -zc 10.10.20.170 2222
Connection to 10.10.20.170 port 2222 [tcp/rockwell-csp2] succeeded!
(venv) STUACLAR-M-R6EU:~ stuaclar$
(venv) STUACLAR-M-R6EU:~ stuaclar$
(venv) STUACLAR-M-R6EU:~ stuaclar$ nc -zc 10.10.20.170 8331
Connection to 10.10.20.170 port 8331 [tcp/*] succeeded!
(venv) STUACLAR-M-R6EU:~ stuaclar$ nc -zc 10.10.20.170 57031
Connection to 10.10.20.170 port 57031 [tcp/*] succeeded!
(venv) STUACLAR-M-R6EU:~ stuaclar$ nc -zc 10.10.20.170 2232
Connection to 10.10.20.170 port 2232 [tcp/ivs-video] succeeded!

 

Please can you test this again with a new reservation and advise of the outcome. You can talk to our team in realtime here on the webex teams rooms for devnet https://developer.cisco.com/site/spark-chat/ (use DevNet Developer Support)

 

HTH

Please mark this as helpful or solution accepted to help others
Connect with me https://bigevilbeard.github.io
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: