03-05-2018 10:04 AM - edited 06-04-2019 02:37 AM
Hello, dears,
I was trying to bring up my NXOS programmability sandbox, but the VIRL server is not coming up in pasted the logs which it generated below, anyone can help regarding this issue, please?.
17:47:02 Lab setup has begun
17:47:28 Generating/Resetting 3 Systems
17:54:50 Setup complete for: Dev Box.NXOSV-022 --> 10.10.20.20
17:55:00 Errors occurred preparing systems. Please use the forum at
https://communities.cisco.com/community/developer/sandbox for assistance
17:55:18 Closing session
03-05-2018 09:19 PM
Hi,
We've spin up a Open NX-OS reservation for you. Please check your inbox for the lab credentials and access details.
Thanks,
Bob
03-07-2018 09:31 AM
Hello dear,
Thanks a lot for your help, now I'm connected to Anyconnect VPN but still cannot ping any of the IPs listed in the lab and also I do not have SSH option under the arrow inside the lab topology. Can you help me in this regard, please?.
C:\Users\muntadher.hussein>tracert -d 172.16.30.102
Tracing route to 172.16.30.102 over a maximum of 30 hops
1 215 ms 224 ms 218 ms 64.103.37.21
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * ^C
C:\Users\muntadher.hussein>
Regards,
Muntadher.
03-07-2018 08:14 PM
Hi Muntadher,
Your topology is configured as "POAP Network", i.e. no switches configuration and console access should be used. And here is console
Connection Details:
Console to csr1000v-1 -> `telnet 10.10.20.160 17000`
Console to nx-osv9000-4 -> `telnet 10.10.20.160 17008`
Console to nx-osv9000-1 -> `telnet 10.10.20.160 17002`
Console to nx-osv9000-3 -> `telnet 10.10.20.160 17006`
Console to nx-osv9000-2 -> `telnet 10.10.20.160 17004
The enable password is cisco
Regards,
Bob
03-09-2018 07:46 AM
Hello Bob,
Thanks a lot for your help, now I'm trying to login to the NX using the NX-API, but when I use the IP given below it shows me the VIRL server home page, can you please help me in this?.
Regards,
Muntadher.
03-10-2018 01:57 AM
Hi,
I've created another session for you. And the virtual switch is full configured in the environment. Please check NX-API there.
Thanks,
Bob
03-10-2018 06:39 AM
Thanks, dear Bob .
03-12-2018 12:28 AM
hello Bob,
Seems my username and password for the Anyconnect are no longer working. What could be the issue?.
Regards,
Muntadher.
03-12-2018 07:52 AM
Hi,
Can you try the VPN connection again?
Thanks,
Joe
03-12-2018 10:02 AM
Hello Joe,
it's working now . Thanks a lot dear.
Regards,
Muntadher.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide