ASR1004 - 6506 TGiga Conexion Problem

[csco11665954]

Hi,

I have at 6506 and ASR1004, they are conection for TenGiGA Fibra.

The EIGRP is flapping and el ASR send  next log:

*Jul  2 16:48:47.004: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/0/0, link down due to remote fault

*Jul  2 16:49:16.383: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/0/0, link down due to remote fault

*Jul  2 16:49:19.290: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/0/0, link down due to remote fault

*Jul  2 16:49:29.764: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/0/0, link down due to remote fault

*Jul  2 16:50:19.201: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/0/0, link down due to remote fault

*Jul  2 16:50:31.647: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/0/0, link down due to remote fault

*Jul  2 16:50:35.543: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/0/0, link down due to remote fault

[bzendeja]

Hi Gabriel,

ASR1k is detecting an issue with the remote end. Can you send the following information?

- Which transceiver are you using in both sides? Attach a show inventory from both sides.

- Which SPA are you using in the ASR1K?

- Which LC are you using in the 6506?

- Have you tried using other fiber?

- Have you tried using a different port or test with a different transceiver?

- Send the command "sh hw-module subslot 0/0 transceiver 0 sta" from the ASR1K.

- Send the commands "show interface tengX/X transceiver". Check if DOM is supported for that transceiver:

DOM

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_8031.html#wp41142

10 Gbit Compatibility matrix

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.html

Regards,

Bernardo

[csco11665954]

Hi Bernardo,

We read the link of compatiility and change de transceiver, It work now.

thank