el 01-07-2024 11:19 AM
Why?
As far as I know. To use the local credential I need the command #Login Local which in this case it is not there.
¡Resuelto! Ir a solución.
el 01-07-2024 11:23 AM
Hello @davidcriollo
Because aaa new model is configured then login local command is not available under lines vty and con. By default, the command login authentication default is configured since aaa new model is configured. So you need the creds username and password enter in local.
el 01-07-2024 11:23 AM
Hello @davidcriollo
Because aaa new model is configured then login local command is not available under lines vty and con. By default, the command login authentication default is configured since aaa new model is configured. So you need the creds username and password enter in local.
el 01-07-2024 12:02 PM
When you apply aaa new model
By defualt the login auth of vty will change to use default method of aaa.
I thinking about command show you what really apply to vty.
But let me check this command.
Update you tomorrow
MHM
el 01-07-2024 12:17 PM
@MHM Cisco World @davidcriollo
#show run all
el 01-07-2024 12:20 PM
You sure' I try this before there is nothing appear as I remember.
MHM
el 01-07-2024 12:33 PM
sorry even the command I think about is not showing the login auth default under vty
the show run all <<- as I mention this not show the login auth
and this command in my mind also not show the default
If I get something I will update you
MHM
Descubra y salve sus notas favoritas. Vuelva a encontrar las respuestas de los expertos, guías paso a paso, temas recientes y mucho más.
¿Es nuevo por aquí? Empiece con estos tips. Cómo usar la comunidad Guía para nuevos miembros
Navegue y encuentre contenido personalizado de la comunidad