cancelar
Mostrando los resultados de 
Buscar en lugar de 
Quiere decir: 
cancel
1113
Visitas
0
ÚTIL
2
Respuestas

Tráfico entre los VSS

Buenos días,

 

Es normal que entre dos SW conectados entre sí con la tecnología VSS es normal tanto tráfico , esto debido a que uno equipo esta como principal y el otro como BK.

 

les comparto el show ver

 

MDENIQSWCORE#show ver
Cisco IOS Software, s2t54 Software (s2t54-ADVENTERPRISEK9-M), Version 15.5(1)SY1 , RELEASE SOFTWARE (fc6)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Sun 04-Mar-18 06:00 by prod_rel_team

ROM: System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)

MDENIQSWCORE uptime is 1 year, 6 weeks, 3 days, 9 hours, 31 minutes
Uptime for this control processor is 1 year, 6 weeks, 3 days, 9 hours, 26 minute s
System returned to ROM by Stateful Switchover at 01:18:25 GMT Mon May 7 2018
System restarted at 01:22:33 GMT Mon May 7 2018
System image file is "bootdisk:s2t54-adventerprisek9-mz.SPA.155-1.SY1.bin"
Last reload reason: Standby Handler Reload Shelf

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco C6807-XL (M8572) processor (revision ) with 1785856K/262144K bytes of memory.
Processor board ID SMC1824002C
CPU: MPC8572_E, Version: 2.2, (0x80E80022)
CORE: E500, Version: 3.0, (0x80210030)
CPU:1500MHz, CCB:600MHz, DDR:600MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled

Last reset from s/w reset
10 Virtual Ethernet interfaces
150 Gigabit Ethernet interfaces
68 Ten Gigabit Ethernet interfaces
2543K bytes of non-volatile configuration memory.

Configuration register is 0x2102

 

 

MDENIQSWCORE#show switch virtual
Switch mode : Virtual Switch
Virtual switch domain number : 100
Local switch number : 2
Local switch operational role: Virtual Switch Active
Peer switch number : 1
Peer switch operational role : Virtual Switch Standby
MDENIQSWCORE#

 

 

MDENIQSWCORE#show interfaces tenGigabitEthernet 1/3/4
TenGigabitEthernet1/3/4 is up, line protocol is up (connected)
Hardware is C6k 10000Mb 802.3, address is 0008.e3ff.fd90 (bia 0008.e3ff.fd90)
Description: VSS-LINK (10G 2/3/4)
MTU 9216 bytes, BW 10000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 20/255, rxload 11/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 10Gb/s, media type is 10Gbase-SR
input flow-control is on, output flow-control is off
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters 39w2d
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 443418000 bits/sec, 78189 packets/sec
5 minute output rate 784317000 bits/sec, 146833 packets/sec
L2 Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
L3 in Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
L3 out Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
301101410973 packets input, 210897762597850 bytes, 0 no buffer
Received 13871608948 broadcasts (3703292342 multicasts)
0 runts, 2026457765 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
601954829781 packets output, 359922186828071 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out

 

 

MDENIQSWCORE#show interfaces tenGigabitEthernet 2/3/4
TenGigabitEthernet2/3/4 is up, line protocol is up (connected)
Hardware is C6k 10000Mb 802.3, address is 0008.e3ff.fd90 (bia 0008.e3ff.fd90)
Description: VSS-LINK (10G 1/3/4)
MTU 9216 bytes, BW 10000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 11/255, rxload 22/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 10Gb/s, media type is 10Gbase-SR
input flow-control is on, output flow-control is off
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters 39w2d
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 867404000 bits/sec, 154580 packets/sec
5 minute output rate 467490000 bits/sec, 80529 packets/sec
L2 Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
L3 in Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
L3 out Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
601968887580 packets input, 359934344081386 bytes, 0 no buffer
Received 10816286003 broadcasts (329658696 multicasts)
0 runts, 3529527687 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
301108922597 packets output, 210903491132544 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out

2 RESPUESTAS 2

Hola,

Borra lo counters de las interfaces y verifica si se siguen incrementando:

clear counter <interface>

 

Que esta conectado en ambas interfaces? es el enlace entre ellos, podria ser que un dispositivo como switch de acceso tenga conexion unicamente al switch de backup y el trafico que ves sea de transito.

 

Saludos 




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

Buenas tardes,

 

Ambas interfaces conectan  el SW core para armar  el VSS

 

saludos

 

JC