ASR1001 getting %QOS-4-DYN_SUSPEND: Queueing hierarchy move failed on

[vinayjaiswal]

IOS 16.9.4 runing version on ASR1k 

%IOSXE-3-PLATFORM: R0/0: cpp_cp: QFP:0.0 Thread:082 TS:00058948579859346288 %IPSEC-3-REPLAY_ERROR: IPSec SA receives anti-replay error, DP Handle 21, src_addr 103.87.15.106, dest_addr 172.20.236.1, SPI 0x686a3887

%QOS-4-DYN_SUSPEND: Queueing hierarchy move failed on Virtual-Access277, suspending policy.

1) %QOS-4-DYN_SUSPEND: Queueing hierarchy move failed on Virtual-AccessXXX, suspending policy.
2) %IOSXE-3-PLATFORM: R0/0: cpp_cp: QFP:0.0 Thread:005 TS:00041948960471087164 %IPSEC-3- REPLAY_ERROR: IPSec SA receives anti-replay error, DP Handle 52, src_addr XXX.XXX.XXX.XXX, dest_addr XXX.XXX.XXX.XXX, SPI 0xc98ddfbc
3) %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-AccessXXX, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-AccessXXX, changed state to up

NO SERVICE IMPACT BUT GEETING MESSAGE ONLY

[balaji.bandi]

1- check the below command system messages and actions:

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/16_xe/smg/xe-16-10/b-sem-16-10-1/b-sem-16-10-x_chapter_0101.html

2 - this is normal, as per i know you get logs

3 - I'm not sure what interface this is. That is related to the Tunnel. You need to provide more configuration information.

Try upgrading the latest stable code when you get a chance and monitor