Edge Computing Infrastructure

What realtime capability can I expect from an IOx app?Would it be sensible to develop a soft-realtime control app (~100ms) using a Cisco 809 router?Thanks

Hi All, Wondering if per chance anyone has come across an easy way to do packet captures in IOx? Specifically I'm trying to determine if a certain type of network traffic is making it to my App. Using packet captures on the IR829, I can see where the...

Hello,I have installed IOS version 15.7 on my IR809.I thought I coud get access to the USB port from container application console, but it's not the case : I do have the same output even I'm connecting or disconnecting my arduino from the USB port./d...

Hi,I have a problem with the IR809G. The router stucks in the rommon-2.This is the output in putty:<3> [0.753643] IOAPIC: IOAPIC 1 initialized, implementation version 32<3> [0.753643] <E1000> e1000_device_init: initialized E1000 device<3> [0.753643] ...

Once I came across an app for 829, that could stream video from plugged USB drive for the clients who conneced to its wifiCould you point to the page where this is documented ? thankslevi

We have followed the following guide, in order to set up our serial ports to communicate with the container. https://communities.cisco.com/docs/DOC-63003However, we are unable to get serial communications functioning properly.Works:Thing ==> Containe...

Hello,I'm trying to use the USB port as serial.And this error message I receive when trying to activate the application with the JSON file : ioxclient app activate lxcusbread --payload dev_map.jsonCurrently active profile :  IR809-4GCommand Name: app...

I am out of resources.I have IR809 with 156-2.T3 with ioxvm 1.3.0-T.bin for the Guestos. I have tried 1.2.4.2-T.bin with the same issue.I can access the Guest OS but CAF is not working.root@IR800-GOS-1:~# monit summaryThe Monit daemon 5.14 uptime: 35...

Is there a way to use the numpy module for Python in the IR829?Please teach me how to use numpy module on IOx.I make the following PaaS App and deploy it.Deployment successfully complete, but App Status: STOPPED after a few seconds.requirements.txtfl...

I have tried to boot the latest IOx image that I could find (c800-universalk9_iox-mz.SPA.156-1.T1.bin), but the router refuses to load it.Does the latest hardened 819 with LTE (4G) support IOx?Many thanks,Stephen

We are currently working with the Cisco IR809 Gateway and its Integration with the LoRa Modem / LoRaWAN server.  While we have successfully installed the latest IOX , Setup the Ethernet Interface Config (GE0) and also setup the DHCP Pool for LoRaWAN ...

The storage for an app is flash by default. A new platform has a separate SATA hard disk for app storage. Is there a way to redirect storage explicitly?