06-06-2017 01:47 PM
Good day to all. I am fork-lifting my perfectly running (2) C160s to C190s as they are going EOS this year.
The C160s are running 8.5.7 and the C190s came pre-loaded with 9.7.2
I know the C160s can't run anything above 8.5 and it seems like the C190s can't run anything lower than 9... So, any ideas on the best way to get the config over would be greatly appreciated.
thanks.
--dk
06-06-2017 01:57 PM
Hi,
The suggested method would be to deploy a virtual appliance on 8.5 temporarily matching the C170, migrate the config from the C170 to the virtual.
Then upgrade the virtual to match the C190 and move over the config from the virtual to the C190.
Details about the installation of a vESA can be found here:
http://www.cisco.com/c/dam/en/us/td/docs/security/content_security/virtual_appliances/Cisco_Content_Security_Virtual_Appliance_Install_Guide.pdf
Thank You!
Libin Varghese
06-06-2017 02:01 PM
Do you know where I can get an eval license for the vESA?
06-06-2017 02:07 PM
This was posted a few months back, should still work.
https://supportforums.cisco.com/announcement/13143866/availability-esa-and-sma-virtual-appliances-ciscocom
- Libin V
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide