06-04-2018 02:46 PM - edited 03-08-2019 07:38 PM
Hi Team, looking for good C360 to C390 best practices or if anyone has successfully done this and on which code levels. I'm finding x70 migration documentations but no luck yet o x60 to x90.
Thanks for any feedback!
06-04-2018 08:47 PM
You may need to deploy a virtual appliance on the same version as the C160 and copy its configuration, then upgrade the virtual (and the C390 if needed) to get to the same release before transferring the configuration from the virtual to the C390.
06-06-2018 11:38 AM
Hi Libin,
Thank you for your input. Is there any official Cisco documentation that talks about this procedure and perhaps lists the versions from/to in which case this would be necessary and supported?
Also - as these are 'physical' appliances - will there be any issues porting configs between VM and Physical?
Step1: Deploy VM same code as the old C360
Step2: export configs from old C360 into the VM
Step3: upgrade VM to latest code
Step4: export VM's config to new C390
06-06-2018 11:52 AM
06-24-2018 12:59 PM
Hi,
Run into a challenge. The VMs (C100V) are showing upgrade options:
9.7.1 build 066 (latest)
The new C390s upgrade options for 9.x code showing:
9.7.2 (Build 065 or 131).
Not sure why the VMs are giving me different code options here and I'm not even seeing 10.x or 11.x. Would it be that its C100V and I needed to download the C300V?
Per earlier responses - I'm hoping to bring the VM (transition BOX) and the new C390 on the same code levels (9.x) so I can import/export configs between them. Then I'll upgrade C390 to 10.x or 11.x as needed.
06-24-2018 01:33 PM
Looks like I just needed to do 'multiple' upgrades. I now see the 9.7.2 versions after initial upgrade of the VEs to 9.7.1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide