cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
905
Views
1
Helpful
2
Replies

How to configure a user for SNMP configuration on ESA ?

Givara B
Level 1
Level 1

I want to monitory ESA devices on Zabbix. So I've configured snmp on ESA with snmpconfig command but Zabbix need a userID define so that it can pull all data not only icmp(ping). And there is no UserID settings defined/request during snmpconfig command. Therefore I just wonder if there is a way to define a user for snmp protocol? or is there a system predefine user for snmp ? 

Thanks in Advance 

2 Replies 2

tachadha
Cisco Employee
Cisco Employee

Hi @Givara B ,

The SNMPv3 username is: v3get. Please refer to the Section "Monitoring System Health and Status Using SNMP" : https://www.cisco.com/c/en/us/td/docs/security/esa/esa15-0/user_guide/b_ESA_Admin_Guide_15-0/b_ESA_Admin_Guide_12_1_chapter_0100011.html#con_1096908

Hope this helps!

saliyev
Cisco Employee
Cisco Employee

right. the userID for SNMPv3 on ESA is hardcoded and is only: v3get