10-23-2020 10:43 AM
Hello All,
We have Cisco 5545-x & we running SSLVPN anyconnect. when we do tracert 1st hop is showing public of outside interface. we have configure tunnel route toward inside.
but when do same think form other firewall it show next hope of firewall inside ip.
10-23-2020 10:53 AM
Can you post come example tracert to understand? also VPN config.
10-23-2020 11:01 AM
Non working :
Tracing route to 129.17.176.126 over a maximum of 30 hops
1 359 ms * 339 ms 206.208.229.131
2 342 ms 354 ms 353 ms 10.10.176.189
3 458 ms 347 ms 354 ms 10.10.170.181
4 382 ms 433 ms 410 ms 10.10.55.61
5 370 ms 374 ms 376 ms 67.204.127.79
working :
Tracing route to 129.17.176.126 over a maximum of 30 hops
1 342 ms 354 ms 353 ms 10.10.176.179
2 458 ms 347 ms 354 ms 10.10.170.181
3 382 ms 433 ms 410 ms 10.10.55.61
4 370 ms 374 ms 376 ms 67.204.127.79
10-23-2020 11:17 AM - edited 10-23-2020 11:18 AM
your config ? and what was the ipconfig on both the occasions from PC ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide