hi out there
I have a ASA5545-X which from time to time behaves a bit strange - it encounters overrun on a dual 1G portchannel:
t# sh int | inc overrun
48300 input errors, 0 CRC, 0 frame, 48300 overrun, 0 ignored, 0 abort
32516 input errors, 0 CRC, 0 frame, 32516 overrun, 0 ignored, 0 abort
406435 input errors, 0 CRC, 0 frame, 406435 overrun, 0 ignored, 0 abort
311216 input errors, 0 CRC, 0 frame, 311216 overrun, 0 ignored, 0 abort
now - that box is seldom really heavely loaded - mostly we see 3-400mbps
According to Cisco the most common cause - as I understand it - is cpu-hogs which then caused failure in handling the incoming traffic.
I have been looking a bit at the output from sh proc cpu-hog but I cannot relate the time-stamps from when a cpu-hog is detected to when we see these overrun's.
the interfaces in the port-channel shows me these input queue currently:
input queue (blocks free curr/low): hardware (494/362)
input queue (blocks free curr/low): hardware (475/362)
Has somebody else seen similar problems on these boxes? Suggestions?
We are running ver asa962-7-smp-k8.bin
br /thomas iwang