Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
6671
Views
10
Helpful
20
Replies

Sourcefire 3D Device S3 Upgrade from 5.3.0.8 to 5.4.0.

Go to solution
n.avramenko87
Level 1
Level 1

‎06-30-2016 05:48 AM - edited ‎03-12-2019 06:03 AM

Hello! Try to update for more new version my sensor.

At first I try update from System-Updates-but i see that "No new updates currently available"

Ok!I downloaded Sourcefire 3D Device S3 Upgrade (version 5.4.0-763) and upload to updade center.

After that try to install update. ([ 7%] Running script 000_start/111_FS_integrity_check.sh...) after that I have error.

I have version of sensor - 5.3.0.8, may be i need to install another version (not 5.4.0.)? Thank you!

1 person had this problem
Labels:
Preview file
70 KB
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Jetsy Mathew
Cisco Employee
Cisco Employee

‎06-30-2016 06:33 AM

Hello Team,

The upgrade looks like failed in FS integrity check error. This will be same error even if you install 5.4.0 without resolving issue.

Could you please try running the following command and restart the upgrade.

 Login to the CLI of the appliance which is having the upgrade issue.

 Elevate to the root user and run the following command :-

 touch /.skip_fsic

 Rate if that helps you.

Regards
Jetsy 

View solution in original post

0 Helpful
20 Replies 20

Go to solution
Jetsy Mathew
Cisco Employee
Cisco Employee

‎06-30-2016 06:33 AM

Hello Team,

The upgrade looks like failed in FS integrity check error. This will be same error even if you install 5.4.0 without resolving issue.

Could you please try running the following command and restart the upgrade.

 Login to the CLI of the appliance which is having the upgrade issue.

 Elevate to the root user and run the following command :-

 touch /.skip_fsic

 Rate if that helps you.

Regards
Jetsy 

0 Helpful

Go to solution
n.avramenko87
Level 1
Level 1
In response to Jetsy Mathew

‎06-30-2016 07:09 AM

O! Now it is installing.There are no problems.After update I will write!!!

0 Helpful

Go to solution
n.avramenko87
Level 1
Level 1
In response to n.avramenko87

‎06-30-2016 07:25 AM

Now it stops on 30%. And after thaf - failed.(

0 Helpful

Go to solution
Jetsy Mathew
Cisco Employee
Cisco Employee
In response to n.avramenko87

‎06-30-2016 09:16 AM

What is the error that showed up

0 Helpful

Go to solution
Jetsy Mathew
Cisco Employee
Cisco Employee
In response to Jetsy Mathew

‎06-30-2016 10:15 PM

Hello Team,

Have you been able to collect those logs by the following.

cd /var//log/sf/<5.4.0 Upgrade directory>

less status.log

Regards

Jetsy

0 Helpful

Go to solution
n.avramenko87
Level 1
Level 1
In response to Jetsy Mathew

‎06-30-2016 10:21 PM

ui:[ 1%] Running script 000_start/005_reset_chroot.sh...
ui:[ 1%] Running script 000_start/100_start_messages.sh...
ui:[ 3%] Running script 000_start/105_check_model_number.sh...
ui:[ 4%] Running script 000_start/107_version_check.sh...
ui:[11%] Running script 000_start/400_run_troubleshoot.sh...
ui:[13%] Running script 200_pre/001_check_reg.pl...
ui:[13%] Running script 200_pre/002_check_mounts.sh...
ui:[14%] Running script 200_pre/003_check_health.sh...
ui:[23%] Running script 200_pre/201_disable_faild.sh...
ui:[24%] Running script 200_pre/202_disable_syncd.sh...
ui:[24%] Running script 200_pre/400_restrict_rpc.sh...
ui:[26%] Running script 200_pre/500_stop_system.sh...
ui:[29%] Running script 200_pre/999_enable_sync.sh...
ui:[30%] Running script 300_os/100_install_SF_Linux_OS.sh...
ui:[30%] Fatal error: Error running script 300_os/100_install_SF_Linux_OS.sh

0 Helpful

Go to solution
Jetsy Mathew
Cisco Employee
Cisco Employee
In response to n.avramenko87

‎06-30-2016 10:29 PM

Hello,

Enter the 300_os folder  in CLI under same  /var//log/sf/<5.4.0 Upgrade directory  and get the logs 

less 100_install_SF_Linux_OS.sh.log

Regards

Jetsy

0 Helpful

Go to solution
n.avramenko87
Level 1
Level 1
In response to n.avramenko87

‎06-30-2016 10:51 PM

 main_upgrade_script.log

[160630 13:56:02] # UPGRADE STARTING
[160630 13:56:02] ###################
[160630 13:56:02] SKIP /var/sf/upgrade-scripts/5.4.0/000_start/004_correct_fsic.sh
[160630 13:56:02] BEGIN 000_start/005_reset_chroot.sh
[160630 13:56:15] BEGIN 000_start/100_start_messages.sh
[160630 13:56:15] SKIP 000_start/101_run_pruning.pl
[160630 13:56:15] SKIP 000_start/102_check_sru_install_running.pl
[160630 13:56:15] BEGIN 000_start/105_check_model_number.sh
[160630 13:56:15] SKIP 000_start/106_check_HA_updates.pl
[160630 13:56:15] BEGIN 000_start/107_version_check.sh
[160630 13:56:18] SKIP 000_start/108_check_sensors_ver.pl
[160630 13:56:18] SKIP 000_start/109_check_HA_MDC_status.pl
[160630 13:56:18] SKIP 000_start/110_DB_integrity_check.sh
[160630 13:56:18] ** enabling SCRIPT_RECOVERY_MODE for 000_start/111_FS_integrity_check.sh
[160630 13:56:18] BEGIN 000_start/111_FS_integrity_check.sh
[160630 13:56:18] Skipping Filesystem Integrity check (once)
[160630 13:56:19] BEGIN 000_start/112_CF_check.sh
[160630 13:56:19] BEGIN 000_start/113_EO_integrity_check.pl
[160630 13:56:25] BEGIN 000_start/170_link_log.sh
[160630 13:56:36] BEGIN 000_start/250_check_system_files.sh
[160630 13:56:37] BEGIN 000_start/320_remove_backups.sh
[160630 13:56:37] BEGIN 000_start/400_run_troubleshoot.sh
[160630 14:04:43] BEGIN 000_start/410_check_disk_space.sh
[160630 14:04:43] Calculating free disk space (measured in Kbytes)...
[160630 14:04:43] Root disk free = 1956228K, Var disk free = 55999500K
[160630 14:04:43] Accounting for DE directory size (which will be copied)...
[160630 14:04:43] DEDir = 188916
[160630 14:04:43] Root disk free = 1956228K, Var disk free = 55810584K
[160630 14:04:43] Root disk free = 1956228K, Var disk free = 55810584K
[160630 14:04:43] Calculating free disk space (measured in Kbytes)...
[160630 14:04:43] Root disk free = 1956228K, Var disk free = 55999500K
[160630 14:04:43] Accounting for DE directory size (which will be copied)...
[160630 14:04:43] DEDir = 188916
[160630 14:04:43] Root disk free = 1956228K, Var disk free = 55810584K
[160630 14:04:43] Root disk free = 1956228K, Var disk free = 55810584K
[160630 14:04:59] BEGIN 200_pre/000_pre_upgrade_unicode_fix.pl
[160630 14:05:01] BEGIN 200_pre/001_check_reg.pl
[160630 14:05:02] BEGIN 200_pre/002_check_mounts.sh
[160630 14:05:15] BEGIN 200_pre/003_check_health.sh
[160630 14:05:27] BEGIN 200_pre/005_check_manager.pl
[160630 14:05:28] BEGIN 200_pre/006_check_snort.sh
[160630 14:05:43] BEGIN 200_pre/007_check_sru_install.sh
[160630 14:05:55] BEGIN 200_pre/009_check_snort_preproc.sh
[160630 14:06:08] BEGIN 200_pre/011_check_self.sh
[160630 14:06:20] Got sensor model_number in 011_check_self.sh: 63
[160630 14:06:20] BEGIN 200_pre/015_verify_rpm.sh
[160630 14:06:32] BEGIN 200_pre/100_get_snort_from_dc.pl
[160630 14:06:43] BEGIN 200_pre/100_log_version.sh
[160630 14:06:43] BEGIN 200_pre/110_setup_upgrade_ui.sh
[160630 14:06:48] BEGIN 200_pre/120_generate_auth_for_upgrade_ui.pl
[160630 14:06:52] BEGIN 200_pre/152_save_etc_sf.sh
[160630 14:06:53] BEGIN 200_pre/199_before_maintenance_mode.sh
[160630 14:07:05] BEGIN 200_pre/200_enable_maintenance_mode.pl
[160630 14:07:10] BEGIN 200_pre/201_disable_faild.sh
[160630 14:07:22] BEGIN 200_pre/202_disable_syncd.sh
[160630 14:07:35] BEGIN 200_pre/400_restrict_rpc.sh
[160630 14:07:35] BEGIN 200_pre/470_revert_prep.sh
[160630 14:07:35] Calculating free disk space (measured in Kbytes)...
[160630 14:07:35] Root disk free = 1956224K, Var disk free = 55969468K
[160630 14:07:35] Accounting for DE directory size (which will be copied)...
[160630 14:07:35] DEDir = 188916
[160630 14:07:35] Root disk free = 1956224K, Var disk free = 55780552K
[160630 14:07:35] Root disk free = 1956224K, Var disk free = 55780552K
[160630 14:07:55] Calculating free disk space (measured in Kbytes)...
[160630 14:07:55] Root disk free = 1956224K, Var disk free = 57320848K
[160630 14:07:55] Accounting for DE directory size (which will be copied)...
[160630 14:07:55] DEDir = 188916
[160630 14:07:55] Root disk free = 1956224K, Var disk free = 57131932K
[160630 14:07:55] Root disk free = 1956224K, Var disk free = 57131932K
[160630 14:08:30] BEGIN 200_pre/500_stop_system.sh
[160630 14:08:30] Stopping programs...
[160630 14:08:30] Disabling PM cron jobs ...
[160630 14:08:30] Disabling non-system processes ...
[160630 14:08:58] Enabling sftunnel ...
[160630 14:09:02] Enabling sfmgr ...
[160630 14:09:03] Only keep sftunnel, sfmgr, mysqld and ActionQueueScrape.
[160630 14:09:03] Enabling ActionQueueScrape ...
[160630 14:09:03] Disabling non-essential system process httpsd ...
[160630 14:09:03] Disabling non-essential system process FailD ...
[160630 14:09:07] Stopping nfm subsystem ...
[160630 14:09:19] Stopping nmsb subsystem ...
[160630 14:09:32] Unloading kernel modules ...
[160630 14:09:33] Verifying running processes ...
[160630 14:09:33] BEGIN 200_pre/501_recovery.sh
[160630 14:09:33] http server is enabled
[160630 14:09:33] BEGIN 200_pre/501_stop_blackbird_cards.sh
[160630 14:09:34] BEGIN 200_pre/700_update_intrusion_policies.pl
[160630 14:09:35] BEGIN 200_pre/800_free_space.sh
[160630 14:09:46] BEGIN 200_pre/999_enable_sync.sh
[160630 14:09:56] BEGIN 300_os/001_move_to_volume.sh
[160630 14:09:57] BEGIN 300_os/100_install_SF_Linux_OS.sh
[160630 14:11:43] FAILED 300_os/100_install_SF_Linux_OS.sh
[160630 14:11:43] ====================================
[160630 14:11:43] tail -n 10 /var/log/sf/Sourcefire_3D_Device_S3_Upgrade-5.4.0/300_os/100_install_SF_Linux_OS.sh.log
[160630 14:11:44] Fatal error: Error running script 300_os/100_install_SF_Linux_OS.sh
[160630 14:11:44] Exiting.
[160630 14:11:44] Attempting to remove upgrade lock
[160630 14:11:44] Success, removed upgrade lock
[160630 14:15:32] ###################
[160630 14:15:32] # UPGRADE STARTING
[160630 14:15:32] ###################
[160630 14:15:32] SKIP /var/sf/upgrade-scripts/5.4.0/000_start/004_correct_fsic.sh
[160630 14:15:32] BEGIN 000_start/005_reset_chroot.sh
[160630 14:15:43] BEGIN 000_start/100_start_messages.sh
[160630 14:15:43] SKIP 000_start/101_run_pruning.pl
[160630 14:15:43] SKIP 000_start/102_check_sru_install_running.pl
[160630 14:15:43] BEGIN 000_start/105_check_model_number.sh
[160630 14:15:44] SKIP 000_start/106_check_HA_updates.pl
[160630 14:15:44] BEGIN 000_start/107_version_check.sh
[160630 14:15:46] SKIP 000_start/108_check_sensors_ver.pl
[160630 14:15:46] SKIP 000_start/109_check_HA_MDC_status.pl
[160630 14:15:46] SKIP 000_start/110_DB_integrity_check.sh
[160630 14:15:46] SKIP 000_start/111_FS_integrity_check.sh
[160630 14:15:46] SKIP 000_start/112_CF_check.sh
[160630 14:15:47] SKIP 000_start/113_EO_integrity_check.pl
[160630 14:15:47] SKIP 000_start/170_link_log.sh
[160630 14:15:47] SKIP 000_start/250_check_system_files.sh
[160630 14:15:47] SKIP 000_start/320_remove_backups.sh
[160630 14:15:47] BEGIN 000_start/400_run_troubleshoot.sh
[160630 14:21:32] SKIP 000_start/410_check_disk_space.sh
[160630 14:21:32] SKIP 200_pre/000_pre_upgrade_unicode_fix.pl
[160630 14:21:33] BEGIN 200_pre/001_check_reg.pl
[160630 14:21:34] BEGIN 200_pre/002_check_mounts.sh
[160630 14:21:44] BEGIN 200_pre/003_check_health.sh
[160630 14:21:55] SKIP 200_pre/005_check_manager.pl
[160630 14:21:55] SKIP 200_pre/006_check_snort.sh
[160630 14:21:55] SKIP 200_pre/007_check_sru_install.sh
[160630 14:21:55] SKIP 200_pre/009_check_snort_preproc.sh
[160630 14:21:55] SKIP 200_pre/011_check_self.sh
[160630 14:21:56] SKIP 200_pre/015_verify_rpm.sh
[160630 14:21:56] SKIP 200_pre/100_get_snort_from_dc.pl
[160630 14:21:56] SKIP 200_pre/100_log_version.sh
[160630 14:21:56] SKIP 200_pre/110_setup_upgrade_ui.sh
[160630 14:21:56] SKIP 200_pre/120_generate_auth_for_upgrade_ui.pl
[160630 14:21:56] SKIP 200_pre/152_save_etc_sf.sh
[160630 14:21:57] SKIP 200_pre/199_before_maintenance_mode.sh
[160630 14:21:57] SKIP 200_pre/200_enable_maintenance_mode.pl
[160630 14:21:57] BEGIN 200_pre/201_disable_faild.sh
[160630 14:22:08] BEGIN 200_pre/202_disable_syncd.sh
[160630 14:22:18] BEGIN 200_pre/400_restrict_rpc.sh
[160630 14:22:19] SKIP 200_pre/470_revert_prep.sh
[160630 14:22:19] BEGIN 200_pre/500_stop_system.sh
[160630 14:22:19] SKIP 200_pre/501_recovery.sh
[160630 14:22:19] SKIP 200_pre/501_stop_blackbird_cards.sh
[160630 14:22:20] SKIP 200_pre/700_update_intrusion_policies.pl
[160630 14:22:20] SKIP 200_pre/800_free_space.sh
[160630 14:22:20] BEGIN 200_pre/999_enable_sync.sh
[160630 14:22:31] SKIP 300_os/001_move_to_volume.sh
[160630 14:22:31] ** enabling SCRIPT_RECOVERY_MODE for 300_os/100_install_SF_Linux_OS.sh
S.sh
[160630 14:22:31] BEGIN 300_os/100_install_SF_Linux_OS.sh
[160630 14:23:47] FAILED 300_os/100_install_SF_Linux_OS.sh
[160630 14:23:47] ====================================
[160630 14:23:47] tail -n 10 /var/log/sf/Sourcefire_3D_Device_S3_Upgrade-5.4.0/300_os/100_install_SF_Linux_OS.sh.log
[160630 14:23:47] Fatal error: Error running script 300_os/100_install_SF_Linux_OS.sh
[160630 14:23:47] Exiting.
[160630 14:23:47] Attempting to remove upgrade lock
[160630 14:23:47] Success, removed upgrade lock
[160630 15:09:51] ###################
[160630 15:09:51] # UPGRADE STARTING
[160630 15:09:51] ###################
[160630 15:09:51] SKIP /var/sf/upgrade-scripts/5.4.0/000_start/004_correct_fsic.sh
[160630 15:09:51] BEGIN 000_start/005_reset_chroot.sh
[160630 15:10:04] BEGIN 000_start/100_start_messages.sh
[160630 15:10:04] SKIP 000_start/101_run_pruning.pl
[160630 15:10:04] SKIP 000_start/102_check_sru_install_running.pl
[160630 15:10:04] BEGIN 000_start/105_check_model_number.sh
[160630 15:10:04] SKIP 000_start/106_check_HA_updates.pl
[160630 15:10:04] BEGIN 000_start/107_version_check.sh
[160630 15:10:07] SKIP 000_start/108_check_sensors_ver.pl
[160630 15:10:07] SKIP 000_start/109_check_HA_MDC_status.pl
[160630 15:10:07] SKIP 000_start/110_DB_integrity_check.sh
[160630 15:10:07] SKIP 000_start/111_FS_integrity_check.sh
[160630 15:10:07] SKIP 000_start/112_CF_check.sh
[160630 15:10:08] SKIP 000_start/113_EO_integrity_check.pl
[160630 15:10:08] SKIP 000_start/170_link_log.sh
[160630 15:10:08] SKIP 000_start/250_check_system_files.sh
[160630 15:10:08] SKIP 000_start/320_remove_backups.sh
[160630 15:10:08] BEGIN 000_start/400_run_troubleshoot.sh
[160630 15:18:32] SKIP 000_start/410_check_disk_space.sh
[160630 15:18:32] SKIP 200_pre/000_pre_upgrade_unicode_fix.pl
[160630 15:18:32] BEGIN 200_pre/001_check_reg.pl
[160630 15:18:34] BEGIN 200_pre/002_check_mounts.sh
[160630 15:18:46] BEGIN 200_pre/003_check_health.sh
[160630 15:18:59] SKIP 200_pre/005_check_manager.pl
[160630 15:18:59] SKIP 200_pre/006_check_snort.sh
[160630 15:18:59] SKIP 200_pre/007_check_sru_install.sh
[160630 15:18:59] SKIP 200_pre/009_check_snort_preproc.sh
[160630 15:18:59] SKIP 200_pre/011_check_self.sh
[160630 15:18:59] SKIP 200_pre/015_verify_rpm.sh
[160630 15:19:00] SKIP 200_pre/100_get_snort_from_dc.pl
[160630 15:19:00] SKIP 200_pre/100_log_version.sh
[160630 15:19:00] SKIP 200_pre/110_setup_upgrade_ui.sh
[160630 15:19:00] SKIP 200_pre/120_generate_auth_for_upgrade_ui.pl
[160630 15:19:00] SKIP 200_pre/152_save_etc_sf.sh
[160630 15:19:00] SKIP 200_pre/199_before_maintenance_mode.sh
[160630 15:19:01] SKIP 200_pre/200_enable_maintenance_mode.pl
[160630 15:19:01] BEGIN 200_pre/201_disable_faild.sh
[160630 15:19:14] BEGIN 200_pre/202_disable_syncd.sh
[160630 15:19:26] BEGIN 200_pre/400_restrict_rpc.sh
[160630 15:19:26] SKIP 200_pre/470_revert_prep.sh
[160630 15:19:27] BEGIN 200_pre/500_stop_system.sh
[160630 15:19:27] Stopping programs...
[160630 15:19:27] Disabling PM cron jobs ...
[160630 15:19:27] Disabling non-system processes ...
[160630 15:19:58] Enabling sftunnel ...
[160630 15:20:03] Enabling sfmgr ...
[160630 15:20:04] Only keep sftunnel, sfmgr, mysqld and ActionQueueScrape.
[160630 15:20:04] Enabling ActionQueueScrape ...
[160630 15:20:04] Disabling non-essential system process httpsd ...
[160630 15:20:04] Disabling non-essential system process FailD ...
[160630 15:20:08] Stopping nfm subsystem ...
[160630 15:20:19] Stopping nmsb subsystem ...
[160630 15:20:33] Unloading kernel modules ...
[160630 15:20:33] Verifying running processes ...
[160630 15:20:33] SKIP 200_pre/501_recovery.sh
[160630 15:20:34] SKIP 200_pre/501_stop_blackbird_cards.sh
[160630 15:20:34] SKIP 200_pre/700_update_intrusion_policies.pl
[160630 15:20:34] SKIP 200_pre/800_free_space.sh
[160630 15:20:34] BEGIN 200_pre/999_enable_sync.sh
[160630 15:20:45] SKIP 300_os/001_move_to_volume.sh
[160630 15:20:45] ** enabling SCRIPT_RECOVERY_MODE for 300_os/100_install_SF_Linux_OS.sh
[160630 15:20:45] BEGIN 300_os/100_install_SF_Linux_OS.sh
[160630 15:22:00] FAILED 300_os/100_install_SF_Linux_OS.sh
[160630 15:22:00] ====================================
[160630 15:22:00] tail -n 10 /var/log/sf/Sourcefire_3D_Device_S3_Upgrade-5.4.0/300_os/100_install_SF_Linux_OS.sh.log
[160630 15:22:00] Fatal error: Error running script 300_os/100_install_SF_Linux_OS.sh
[160630 15:22:00] Exiting.
[160630 15:22:00] Attempting to remove upgrade lock
239,1 99%

0 Helpful

Go to solution
n.avramenko87
Level 1
Level 1
In response to n.avramenko87

‎07-01-2016 01:34 AM

100_install_SF_Linux_OS.sh.log

**********************************************************
[160630 14:09] Starting script: 300_os/100_install_SF_Linux_OS.sh
Entering 300_os/100_install_SF_Linux_OS.sh...
Sourcefire Linux OS 5.3.0-63
/bin/sh files/Sourcefire_Linux_OS_5.4.0-126_Upgrade-1-x86_64.sh --target /var/tmp/sf_os_install -- --logdir /var/log/sf/Sourcefire_3D_Device_S3_Upgrade-5.4.0
Creating directory /var/tmp/sf_os_install
Verifying archive integrity... All good.
Uncompressing Sourcefire Linux OS 5.4.0 Upgrade for x86_64 / Tue Sep 30 15:47:33 UTC 2014....................................................................................................
mkdir: created directory `/var/log/os-upgrade-5.4.0'
[Thu Jun 30 14:10:10 UTC 2016] #####################
[Thu Jun 30 14:10:10 UTC 2016] # UPGRADE STARTING
[Thu Jun 30 14:10:10 UTC 2016] #####################
[Thu Jun 30 14:10:10 UTC 2016]
[Thu Jun 30 14:10:10 UTC 2016] Phase 1: Checking system configuration
[Thu Jun 30 14:10:10 UTC 2016] ======================================
[Thu Jun 30 14:10:10 UTC 2016] Checking upgrade directory...
[Thu Jun 30 14:10:10 UTC 2016] Calculating free disk space (measured in Kbytes)...
[Thu Jun 30 14:10:10 UTC 2016] Root disk free = 1956172, Var disk free = 56962340
[Thu Jun 30 14:10:10 UTC 2016] Checking free /root disk space...
[Thu Jun 30 14:10:10 UTC 2016] Checking free /var disk space...
[Thu Jun 30 14:10:10 UTC 2016] Checking OS version...
[Thu Jun 30 14:10:10 UTC 2016] Your OS version is 5.3.0-63.
[Thu Jun 30 14:10:10 UTC 2016] Installing OS 5.4.0-126.
[Thu Jun 30 14:10:10 UTC 2016] Checking build version...
[Thu Jun 30 14:10:10 UTC 2016] Your build version is 63.
[Thu Jun 30 14:10:10 UTC 2016] Phase 1 complete.
[Thu Jun 30 14:10:10 UTC 2016]
[Thu Jun 30 14:10:10 UTC 2016] Undoing any existing mounts
[Thu Jun 30 14:10:10 UTC 2016] Command [rm -rf /Volume/5.4.0] succeeded!
[Thu Jun 30 14:10:10 UTC 2016] The active root partition is /dev/sda5
[Thu Jun 30 14:10:10 UTC 2016] The new(upgraded) root partition will be /dev/sda6
[Thu Jun 30 14:10:10 UTC 2016] The new root partition's temporary mount point is /new-root
[Thu Jun 30 14:10:10 UTC 2016] Command [mkdir -m 755 -p /new-root] succeeded!
[Thu Jun 30 14:10:15 UTC 2016] Command [mke2fs -j /dev/sda6] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Command [mount /dev/sda6 /new-root] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Command [mkdir -m 755 -p /new-root/proc /new-root/sys /new-root/var /new-root/boot /new-root/tmp /new-root/Volume /new-root/usr/local/sf] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Command [e2label /dev/sda6 3D-5.4.0] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Command [mkdir -m 755 -vp /Volume/5.4.0 /Volume/5.4.0/log/sf /Volume/5.4.0/sf /Volume/5.4.0/perl5] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Command [mkdir -m 755 -vp /new-root/boot] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Mounting /boot on /boot
[Thu Jun 30 14:10:16 UTC 2016] Command [mkdir -m 755 -vp /new-root/var] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Mounting /Volume/5.4.0 on /var
[Thu Jun 30 14:10:16 UTC 2016] Command [mkdir -m 755 -vp /new-root/usr/lib/perl5] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Mounting /Volume/5.4.0/perl5 on /usr/lib/perl5
[Thu Jun 30 14:10:16 UTC 2016] Command [mkdir -m 755 -vp /new-root/var/lib/mysql] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Mounting /var/lib/mysql on /var/lib/mysql
[Thu Jun 30 14:10:16 UTC 2016] Command [mkdir -m 755 -vp /new-root/var/run] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Mounting /var/run on /var/run
[Thu Jun 30 14:10:16 UTC 2016] Command [mkdir -m 755 -vp /new-root/var/log/sf] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Mounting /var/log/sf on /var/log/sf
[Thu Jun 30 14:10:16 UTC 2016] Command [mkdir -m 755 -vp /new-root/usr/local/sf] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Mounting /Volume/5.4.0/sf on /usr/local/sf
[Thu Jun 30 14:10:16 UTC 2016] Command [mount -t proc proc /new-root/proc] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Command [mount -t sysfs sysfs /new-root/sys] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Command [mount -t usbfs usbfs /new-root/proc/bus/usb] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Command [rm -rvf /var/log/os-upgrade-5.4.0/copy_root.log] succeeded!
[Thu Jun 30 14:10:16 UTC 2016] Copying root, excluding --exclude=*usr/local/sf --exclude=*lib/modules --exclude=*dev/log, logged to /var/log/os-upgrade-5.4.0/copy_root.log

[Thu Jun 30 14:10:24 UTC 2016] Command [mkdir -vp -m 755 /new-root/sys] succeeded!
[Thu Jun 30 14:10:24 UTC 2016] Command [mkdir -vp -m 755 /new-root/mnt/hd /new-root/mnt/cdrom /new-root/mnt/floppy] succeeded!
[Thu Jun 30 14:10:24 UTC 2016] Command [chmod 644 /new-root/etc/passwd] succeeded!
[Thu Jun 30 14:10:24 UTC 2016] Command [chmod 755 /new-root/ /new-root/usr /new-root/etc/ /new-root/usr/local] succeeded!
[Thu Jun 30 14:10:24 UTC 2016] Command [rm -rvf /var/log/os-upgrade-5.4.0/copy_var.log] succeeded!
[Thu Jun 30 14:10:24 UTC 2016] Copying var, exclude --exclude=sf/updates/* --exclude=sf/apply/* --exclude=sf/fireamp/fireamp.log.* --exclude=sf/useridentity/ui.bin.* --exclude=sf/remote-backup --exclude=common/* --exclude=sf/backup/* --exclude=*lib/mysql --exclude=*log/sf --exclude=*sf/run --exclude=sf/peers/*.sox --exclude=*/*unified* --exclude=*/rna.bin* --exclude=storage --exclude=sf/fileCapture, logged to /var/log/os-upgrade-5.4.0/copy_var.log
[Thu Jun 30 14:11:06 UTC 2016] Copying perl5, logged to /var/log/os-upgrade-5.4.0/copy_perl5.log
[Thu Jun 30 14:11:08 UTC 2016] Command [mkdir -vp /Volume/5.4.0/tmp /Volume/5.4.0/run /Volume/5.4.0/sf/run /Volume/5.4.0/sf/peers /Volume/5.4.0/log/sf /Volume/5.4.0/lib/mysql] succeeded!
[Thu Jun 30 14:11:08 UTC 2016] No storage in /var
[Thu Jun 30 14:11:08 UTC 2016] Command [mkdir -vp /Volume/5.4.0/sf/fileCapture] succeeded!
[Thu Jun 30 14:11:08 UTC 2016] Command [chmod -v 775 /Volume/5.4.0/sf/run /Volume/5.4.0/run] succeeded!
[Thu Jun 30 14:11:08 UTC 2016] Command [chown -v root:www /Volume/5.4.0/sf/run] succeeded!
[Thu Jun 30 14:11:08 UTC 2016] Moving update files, [/var/sf/updates/Sourcefire_3D_Device_S3_Patch-5.3.0.8-15.1467272199.info
/var/sf/updates/Sourcefire_3D_Device_S3_Patch-5.3.0.8-15.1467272199.lsm
/var/sf/updates/Sourcefire_3D_Device_S3_Patch-5.3.0.8-15.sh
/var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.1-66.1230847794.info
/var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.1-66.1230847794.lsm
/var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.2-55.1230848218.info
/var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.2-55.1230848218.lsm
/var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.3-56.1230848696.info
/var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.3-56.1230848696.lsm
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 (1).1467290102.info
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 (1).1467290102.lsm
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 (1).sh
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763.1467269278.info
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763.1467269278.lsm
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763.sh]

[Thu Jun 30 14:11:08 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Patch-5.3.0.8-15.1467272199.info /Volume/5.4.0/sf/updates] succeeded!
[Thu Jun 30 14:11:08 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Patch-5.3.0.8-15.1467272199.lsm /Volume/5.4.0/sf/updates] succeeded!
[Thu Jun 30 14:11:43 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Patch-5.3.0.8-15.sh /Volume/5.4.0/sf/updates] succeeded!
[Thu Jun 30 14:11:43 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.1-66.1230847794.info /Volume/5.4.0/sf/updates] succeeded!
[Thu Jun 30 14:11:43 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.1-66.1230847794.lsm /Volume/5.4.0/sf/updates] succeeded!
[Thu Jun 30 14:11:43 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.2-55.1230848218.info /Volume/5.4.0/sf/updates] succeeded!
[Thu Jun 30 14:11:43 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.2-55.1230848218.lsm /Volume/5.4.0/sf/updates] succeeded!
[Thu Jun 30 14:11:43 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.3-56.1230848696.info /Volume/5.4.0/sf/updates] succeeded!
[Thu Jun 30 14:11:43 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Patch_Uninstaller-5.3.0.3-56.1230848696.lsm /Volume/5.4.0/sf/updates] succeeded!
[Thu Jun 30 14:11:43 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 /Volume/5.4.0/sf/updates] failed (1)!
[Thu Jun 30 14:11:43 UTC 2016] [mv: cannot stat `/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763': No such file or directory]
[Thu Jun 30 14:11:43 UTC 2016]
[Thu Jun 30 14:11:43 UTC 2016] Exiting with error code 1: Unable to move /var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 to /Volume/5.4.0/sf/updates
[Thu Jun 30 14:11:43 UTC 2016] Umounting myself at /new-root//var/tmp/sf_os_install
[Thu Jun 30 14:11:43 UTC 2016] Removing upgrade lock.
[Thu Jun 30 14:11:43 UTC 2016] Command [rm -vf /tmp/upgrade-os.lock] succeeded!
[Thu Jun 30 14:11:43 UTC 2016] Exit with 1 and 1
Fatal error: SF-OS upgrade failed!
**********************************************************
[160630 14:22] Starting script: 300_os/100_install_SF_Linux_OS.sh
Entering 300_os/100_install_SF_Linux_OS.sh...
Sourcefire Linux OS 5.3.0-63
/bin/sh files/Sourcefire_Linux_OS_5.4.0-126_Upgrade-1-x86_64.sh --target /var/tmp/sf_os_install -- --logdir /var/log/sf/Sourcefire_3D_Device_S3_Upgrade-5.4.0
Creating directory /var/tmp/sf_os_install
Verifying archive integrity... All good.
Uncompressing Sourcefire Linux OS 5.4.0 Upgrade for x86_64 / Tue Sep 30 15:47:33 UTC 2014....................................................................................................
[Thu Jun 30 14:22:44 UTC 2016] #####################
[Thu Jun 30 14:22:44 UTC 2016] # UPGRADE STARTING
[Thu Jun 30 14:22:44 UTC 2016] #####################
[Thu Jun 30 14:22:44 UTC 2016]
[Thu Jun 30 14:22:44 UTC 2016] Phase 1: Checking system configuration
[Thu Jun 30 14:22:44 UTC 2016] ======================================
[Thu Jun 30 14:22:44 UTC 2016] Checking upgrade directory...
[Thu Jun 30 14:22:44 UTC 2016] Calculating free disk space (measured in Kbytes)...
[Thu Jun 30 14:22:44 UTC 2016] Root disk free = 1956164, Var disk free = 54809564
[Thu Jun 30 14:22:44 UTC 2016] Checking free /root disk space...
[Thu Jun 30 14:22:44 UTC 2016] Checking free /var disk space...
[Thu Jun 30 14:22:44 UTC 2016] Checking OS version...
[Thu Jun 30 14:22:44 UTC 2016] Your OS version is 5.3.0-63.
[Thu Jun 30 14:22:44 UTC 2016] Installing OS 5.4.0-126.
[Thu Jun 30 14:22:44 UTC 2016] Checking build version...
[Thu Jun 30 14:22:44 UTC 2016] Your build version is 63.
[Thu Jun 30 14:22:44 UTC 2016] Phase 1 complete.

[Thu Jun 30 14:22:44 UTC 2016]
[Thu Jun 30 14:22:44 UTC 2016] Undoing any existing mounts
[Thu Jun 30 14:22:44 UTC 2016] Command [umount /new-root/usr/lib/perl5] succeeded!
[Thu Jun 30 14:22:44 UTC 2016] Command [umount /new-root/var/lib/mysql] succeeded!
[Thu Jun 30 14:22:44 UTC 2016] Command [umount /new-root/var/run] succeeded!
[Thu Jun 30 14:22:44 UTC 2016] Command [umount /new-root/var/log/sf] succeeded!
[Thu Jun 30 14:22:44 UTC 2016] Command [umount /new-root/usr/local/sf] succeeded!
[Thu Jun 30 14:22:44 UTC 2016] Command [umount /new-root/proc/bus/usb] succeeded!
[Thu Jun 30 14:22:44 UTC 2016] Command [umount /new-root/proc] succeeded!
[Thu Jun 30 14:22:44 UTC 2016] Command [umount /new-root/sys] succeeded!
[Thu Jun 30 14:22:44 UTC 2016] Command [umount /new-root/var] succeeded!
[Thu Jun 30 14:22:44 UTC 2016] Command [umount /new-root/boot] succeeded!
[Thu Jun 30 14:22:44 UTC 2016] Command [umount /new-root] succeeded!
[Thu Jun 30 14:22:45 UTC 2016] Command [rm -rf /Volume/5.4.0] succeeded!
[Thu Jun 30 14:22:45 UTC 2016] The active root partition is /dev/sda5
[Thu Jun 30 14:22:45 UTC 2016] The new(upgraded) root partition will be /dev/sda6
[Thu Jun 30 14:22:45 UTC 2016] The new root partition's temporary mount point is /new-root
[Thu Jun 30 14:22:45 UTC 2016] Command [mkdir -m 755 -p /new-root] succeeded!
[Thu Jun 30 14:22:50 UTC 2016] Command [mke2fs -j /dev/sda6] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Command [mount /dev/sda6 /new-root] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Command [mkdir -m 755 -p /new-root/proc /new-root/sys /new-root/var /new-root/boot /new-root/tmp /new-root/Volume /new-root/usr/local/sf] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Command [e2label /dev/sda6 3D-5.4.0] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Command [mkdir -m 755 -vp /Volume/5.4.0 /Volume/5.4.0/log/sf /Volume/5.4.0/sf /Volume/5.4.0/perl5] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Command [mkdir -m 755 -vp /new-root/boot] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Mounting /boot on /boot
[Thu Jun 30 14:22:51 UTC 2016] Command [mkdir -m 755 -vp /new-root/var] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Mounting /Volume/5.4.0 on /var
[Thu Jun 30 14:22:51 UTC 2016] Command [mkdir -m 755 -vp /new-root/usr/lib/perl5] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Mounting /Volume/5.4.0/perl5 on /usr/lib/perl5
[Thu Jun 30 14:22:51 UTC 2016] Command [mkdir -m 755 -vp /new-root/var/lib/mysql] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Mounting /var/lib/mysql on /var/lib/mysql
[Thu Jun 30 14:22:51 UTC 2016] Command [mkdir -m 755 -vp /new-root/var/run] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Mounting /var/run on /var/run
[Thu Jun 30 14:22:51 UTC 2016] Command [mkdir -m 755 -vp /new-root/var/log/sf] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Mounting /var/log/sf on /var/log/sf
[Thu Jun 30 14:22:51 UTC 2016] Command [mkdir -m 755 -vp /new-root/usr/local/sf] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Mounting /Volume/5.4.0/sf on /usr/local/sf
[Thu Jun 30 14:22:51 UTC 2016] Command [mount -t proc proc /new-root/proc] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Command [mount -t sysfs sysfs /new-root/sys] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Command [mount -t usbfs usbfs /new-root/proc/bus/usb] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Command [rm -rvf /var/log/os-upgrade-5.4.0/copy_root.log] succeeded!
[Thu Jun 30 14:22:51 UTC 2016] Copying root, excluding --exclude=*usr/local/sf --exclude=*lib/modules --exclude=*dev/log, logged to /var/log/os-upgrade-5.4.0/copy_root.log

[Thu Jun 30 14:22:59 UTC 2016] Command [mkdir -vp -m 755 /new-root/sys] succeeded!
[Thu Jun 30 14:22:59 UTC 2016] Command [mkdir -vp -m 755 /new-root/mnt/hd /new-root/mnt/cdrom /new-root/mnt/floppy] succeeded!
[Thu Jun 30 14:22:59 UTC 2016] Command [chmod 644 /new-root/etc/passwd] succeeded!
[Thu Jun 30 14:22:59 UTC 2016] Command [chmod 755 /new-root/ /new-root/usr /new-root/etc/ /new-root/usr/local] succeeded!
[Thu Jun 30 14:22:59 UTC 2016] Command [rm -rvf /var/log/os-upgrade-5.4.0/copy_var.log] succeeded!
[Thu Jun 30 14:22:59 UTC 2016] Copying var, exclude --exclude=sf/updates/* --exclude=sf/apply/* --exclude=sf/fireamp/fireamp.log.* --exclude=sf/useridentity/ui.bin.* --exclude=sf/remote-backup --exclude=common/* --exclude=sf/backup/* --exclude=*lib/mysql --exclude=*log/sf --exclude=*sf/run --exclude=sf/peers/*.sox --exclude=*/*unified* --exclude=*/rna.bin* --exclude=storage --exclude=sf/fileCapture, logged to /var/log/os-upgrade-5.4.0/copy_var.log
[Thu Jun 30 14:23:44 UTC 2016] Copying perl5, logged to /var/log/os-upgrade-5.4.0/copy_perl5.log
[Thu Jun 30 14:23:47 UTC 2016] Command [mkdir -vp /Volume/5.4.0/tmp /Volume/5.4.0/run /Volume/5.4.0/sf/run /Volume/5.4.0/sf/peers /Volume/5.4.0/log/sf /Volume/5.4.0/lib/mysql] succeeded!
[Thu Jun 30 14:23:47 UTC 2016] No storage in /var
[Thu Jun 30 14:23:47 UTC 2016] Command [mkdir -vp /Volume/5.4.0/sf/fileCapture] succeeded!
[Thu Jun 30 14:23:47 UTC 2016] Command [chmod -v 775 /Volume/5.4.0/sf/run /Volume/5.4.0/run] succeeded!
[Thu Jun 30 14:23:47 UTC 2016] Command [chown -v root:www /Volume/5.4.0/sf/run] succeeded!
[Thu Jun 30 14:23:47 UTC 2016] Moving update files, [/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 (1).1467290102.info
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 (1).1467290102.lsm
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 (1).sh
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763.1467269278.info
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763.1467269278.lsm
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763.sh]
[Thu Jun 30 14:23:47 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 /Volume/5.4.0/sf/updates] failed (1)!
[Thu Jun 30 14:23:47 UTC 2016] [mv: cannot stat `/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763': No such file or directory]
[Thu Jun 30 14:23:47 UTC 2016]
[Thu Jun 30 14:23:47 UTC 2016] Exiting with error code 1: Unable to move /var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 to /Volume/5.4.0/sf/updates
[Thu Jun 30 14:23:47 UTC 2016] Umounting myself at /new-root//var/tmp/sf_os_install
[Thu Jun 30 14:23:47 UTC 2016] Removing upgrade lock.
[Thu Jun 30 14:23:47 UTC 2016] Command [rm -vf /tmp/upgrade-os.lock] succeeded!
[Thu Jun 30 14:23:47 UTC 2016] Exit with 1 and 1
Fatal error: SF-OS upgrade failed!
**********************************************************
[160630 15:20] Starting script: 300_os/100_install_SF_Linux_OS.sh
Entering 300_os/100_install_SF_Linux_OS.sh...
Sourcefire Linux OS 5.3.0-63
/bin/sh files/Sourcefire_Linux_OS_5.4.0-126_Upgrade-1-x86_64.sh --target /var/tmp/sf_os_install -- --logdir /var/log/sf/Sourcefire_3D_Device_S3_Upgrade-5.4.0
Creating directory /var/tmp/sf_os_install
Verifying archive integrity... All good.
Uncompressing Sourcefire Linux OS 5.4.0 Upgrade for x86_64 / Tue Sep 30 15:47:33 UTC 2014....................................................................................................

[Thu Jun 30 15:20:58 UTC 2016] #####################
[Thu Jun 30 15:20:58 UTC 2016] # UPGRADE STARTING
[Thu Jun 30 15:20:58 UTC 2016] #####################
[Thu Jun 30 15:20:58 UTC 2016]
[Thu Jun 30 15:20:58 UTC 2016] Phase 1: Checking system configuration
[Thu Jun 30 15:20:58 UTC 2016] ======================================
[Thu Jun 30 15:20:58 UTC 2016] Checking upgrade directory...
[Thu Jun 30 15:20:58 UTC 2016] Calculating free disk space (measured in Kbytes)...
[Thu Jun 30 15:20:58 UTC 2016] Root disk free = 1956168, Var disk free = 56991284
[Thu Jun 30 15:20:58 UTC 2016] Checking free /root disk space...
[Thu Jun 30 15:20:58 UTC 2016] Checking free /var disk space...
[Thu Jun 30 15:20:58 UTC 2016] Checking OS version...
[Thu Jun 30 15:20:58 UTC 2016] Your OS version is 5.3.0-63.
[Thu Jun 30 15:20:58 UTC 2016] Installing OS 5.4.0-126.
[Thu Jun 30 15:20:58 UTC 2016] Checking build version...
[Thu Jun 30 15:20:58 UTC 2016] Your build version is 63.
[Thu Jun 30 15:20:58 UTC 2016] Phase 1 complete.
[Thu Jun 30 15:20:58 UTC 2016]
[Thu Jun 30 15:20:58 UTC 2016] Undoing any existing mounts
[Thu Jun 30 15:20:59 UTC 2016] Command [rm -rf /Volume/5.4.0] succeeded!
[Thu Jun 30 15:20:59 UTC 2016] The active root partition is /dev/sda5
[Thu Jun 30 15:20:59 UTC 2016] The new(upgraded) root partition will be /dev/sda6
[Thu Jun 30 15:20:59 UTC 2016] The new root partition's temporary mount point is /new-root
[Thu Jun 30 15:20:59 UTC 2016] Command [mkdir -m 755 -p /new-root] succeeded!
[Thu Jun 30 15:21:04 UTC 2016] Command [mke2fs -j /dev/sda6] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Command [mount /dev/sda6 /new-root] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Command [mkdir -m 755 -p /new-root/proc /new-root/sys /new-root/var /new-root/boot /new-root/tmp /new-root/Volume /new-root/usr/local/sf] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Command [e2label /dev/sda6 3D-5.4.0] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Command [mkdir -m 755 -vp /Volume/5.4.0 /Volume/5.4.0/log/sf /Volume/5.4.0/sf /Volume/5.4.0/perl5] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Command [mkdir -m 755 -vp /new-root/boot] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Mounting /boot on /boot
[Thu Jun 30 15:21:05 UTC 2016] Command [mkdir -m 755 -vp /new-root/var] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Mounting /Volume/5.4.0 on /var
[Thu Jun 30 15:21:05 UTC 2016] Command [mkdir -m 755 -vp /new-root/usr/lib/perl5] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Mounting /Volume/5.4.0/perl5 on /usr/lib/perl5
[Thu Jun 30 15:21:05 UTC 2016] Command [mkdir -m 755 -vp /new-root/var/lib/mysql] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Mounting /var/lib/mysql on /var/lib/mysql
[Thu Jun 30 15:21:05 UTC 2016] Command [mkdir -m 755 -vp /new-root/var/run] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Mounting /var/run on /var/run
[Thu Jun 30 15:21:05 UTC 2016] Command [mkdir -m 755 -vp /new-root/var/log/sf] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Mounting /var/log/sf on /var/log/sf
[Thu Jun 30 15:21:05 UTC 2016] Command [mkdir -m 755 -vp /new-root/usr/local/sf] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Mounting /Volume/5.4.0/sf on /usr/local/sf
[Thu Jun 30 15:21:05 UTC 2016] Command [mount -t proc proc /new-root/proc] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Command [mount -t sysfs sysfs /new-root/sys] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Command [mount -t usbfs usbfs /new-root/proc/bus/usb] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Command [rm -rvf /var/log/os-upgrade-5.4.0/copy_root.log] succeeded!
[Thu Jun 30 15:21:05 UTC 2016] Copying root, excluding --exclude=*usr/local/sf --exclude=*lib/modules --exclude=*dev/log, logged to /var/log/os-upgrade-5.4.0/copy_root.log
[Thu Jun 30 15:21:13 UTC 2016] Command [mkdir -vp -m 755 /new-root/sys] succeeded!
[Thu Jun 30 15:21:13 UTC 2016] Command [mkdir -vp -m 755 /new-root/mnt/hd /new-root/mnt/cdrom /new-root/mnt/floppy] succeeded!
[Thu Jun 30 15:21:13 UTC 2016] Command [chmod 644 /new-root/etc/passwd] succeeded!
[Thu Jun 30 15:21:13 UTC 2016] Command [chmod 755 /new-root/ /new-root/usr /new-root/etc/ /new-root/usr/local] succeeded!
[Thu Jun 30 15:21:13 UTC 2016] Command [rm -rvf /var/log/os-upgrade-5.4.0/copy_var.log] succeeded!
[Thu Jun 30 15:21:13 UTC 2016] Copying var, exclude --exclude=sf/updates/* --exclude=sf/apply/* --exclude=sf/fireamp/fireamp.log.* --exclude=sf/useridentity/ui.bin.* --exclude=sf/remote-backup --exclude=common/* --exclude=sf/backup/* --exclude=*lib/mysql --exclude=*log/sf --exclude=*sf/run --exclude=sf/peers/*.sox --exclude=*/*unified* --exclude=*/rna.bin* --exclude=storage --exclude=sf/fileCapture, logged to /var/log/os-upgrade-5.4.0/copy_var.log

[Thu Jun 30 15:21:57 UTC 2016] Copying perl5, logged to /var/log/os-upgrade-5.4.0/copy_perl5.log
[Thu Jun 30 15:22:00 UTC 2016] Command [mkdir -vp /Volume/5.4.0/tmp /Volume/5.4.0/run /Volume/5.4.0/sf/run /Volume/5.4.0/sf/peers /Volume/5.4.0/log/sf /Volume/5.4.0/lib/mysql] succeeded!
[Thu Jun 30 15:22:00 UTC 2016] No storage in /var
[Thu Jun 30 15:22:00 UTC 2016] Command [mkdir -vp /Volume/5.4.0/sf/fileCapture] succeeded!
[Thu Jun 30 15:22:00 UTC 2016] Command [chmod -v 775 /Volume/5.4.0/sf/run /Volume/5.4.0/run] succeeded!
[Thu Jun 30 15:22:00 UTC 2016] Command [chown -v root:www /Volume/5.4.0/sf/run] succeeded!
[Thu Jun 30 15:22:00 UTC 2016] Moving update files, [/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 (1).1467290102.info
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 (1).1467290102.lsm
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 (1).sh
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763.1467269278.info
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763.1467269278.lsm
/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763.sh]
[Thu Jun 30 15:22:00 UTC 2016] Command [mv -vf /var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 /Volume/5.4.0/sf/updates] failed (1)!
[Thu Jun 30 15:22:00 UTC 2016] [mv: cannot stat `/var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763': No such file or directory]
[Thu Jun 30 15:22:00 UTC 2016]
[Thu Jun 30 15:22:00 UTC 2016] Exiting with error code 1: Unable to move /var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 to /Volume/5.4.0/sf/updates
[Thu Jun 30 15:22:00 UTC 2016] Umounting myself at /new-root//var/tmp/sf_os_install
[Thu Jun 30 15:22:00 UTC 2016] Removing upgrade lock.
[Thu Jun 30 15:22:00 UTC 2016] Command [rm -vf /tmp/upgrade-os.lock] succeeded!
[Thu Jun 30 15:22:00 UTC 2016] Exit with 1 and 1
Fatal error: SF-OS upgrade failed!

0 Helpful

Go to solution
n.avramenko87
Level 1
Level 1
In response to n.avramenko87

‎07-01-2016 01:54 AM

I see problems with  

Unable to move /var/sf/updates/Sourcefire_3D_Device_S3_Upgrade-5.4.0-763 to /Volume/5.4.0/sf/updates

But why?

May be I need to delete all updates from :/var/sf/updates$ and try again?

0 Helpful

Go to solution
n.avramenko87
Level 1
Level 1
In response to n.avramenko87

‎07-01-2016 04:32 AM

OK! Now it is all GOOD!!! THANKO YOU!!!

Is it need to update DefenceCenter and Defence Divice to 6 version?

If it needed , what updates will i need to install?

About Defence center updates: 

1- 6.0.0 Pre-install - Sourcefire S3 Defense Center on 5.4.1

2-FireSIGHT System Series 3 Defense Center Upgrade 6.0

Or I can install FireSIGHT System Series 3 Defense Center Upgrade 6.0 immediately ?

About Device:

1 - 6.0.0 Pre-install - Sourcefire 3D Device S3 on 5.4.0

2 - Sourcefire 3D Device S3 Patch 6.0.0.1

Or I can install Sourcefire 3D Device S3 Patch 6.0.0.1 immediately ?

0 Helpful

Go to solution
Jetsy Mathew
Cisco Employee
Cisco Employee
In response to n.avramenko87

‎07-01-2016 04:39 AM

Hello team,

Is your setup in HA by any chance ?

If so, 6.0 doesnt support HA setup.

Other than that if you are fine with 5.4.1.x latest code , then you can continue in that.

If you want you can continue with 6.0 also. You have to start preinstall and then the 6.0 patch.

Here is detailed release notes.

http://www.cisco.com/c/en/us/td/docs/security/firepower/60/relnote/firepower-system-release-notes-version-600.html

http://www.cisco.com/c/en/us/td/docs/security/firepower/60/relnote/FireSIGHT-System-Release-Notes-Version600-PreInstallation-Package.html

Rate and mark correct if my answer helps you

Regarsd 

Jetsy 

Go to solution
n.avramenko87
Level 1
Level 1
In response to Jetsy Mathew

‎07-01-2016 04:44 AM

Is your setup in HA by any chance ? I not understand what you mean? Now I installing 5.4.0.5 and than try -> 5.4.0.8

0 Helpful

Go to solution
Jetsy Mathew
Cisco Employee
Cisco Employee
In response to n.avramenko87

‎07-01-2016 04:50 AM

HA means High availability.

0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking for a $25 gift card