cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

161
Views
0
Helpful
2
Replies
Cisco Employee

Matrix of switches and versions which support DACL/dACL

Hi Team,

I'm looking for a compatibility matrix which maps out which switch/router and the versions which supports dACL.Does this exist?

Thanks.

Everyone's tags (3)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: Matrix of switches and versions which support DACL/dACL

This is not something we provide from ISE team you can reach out to the respective teams and ask for this. Perhaps feature navigator?

This has been a long term feature so should be included in most if not all active switching/routing access products.

View solution in original post

Cisco Employee

Re: Matrix of switches and versions which support DACL/dACL

You can use this https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/compatibility/ise_sdt.html but it is not granular to the level you want. I would suggest you use Cisco Feature Navigator https://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/index.jsp to know each feature supported by an operating system.

View solution in original post

2 REPLIES 2
Cisco Employee

Re: Matrix of switches and versions which support DACL/dACL

This is not something we provide from ISE team you can reach out to the respective teams and ask for this. Perhaps feature navigator?

This has been a long term feature so should be included in most if not all active switching/routing access products.

View solution in original post

Cisco Employee

Re: Matrix of switches and versions which support DACL/dACL

You can use this https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/compatibility/ise_sdt.html but it is not granular to the level you want. I would suggest you use Cisco Feature Navigator https://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/index.jsp to know each feature supported by an operating system.

View solution in original post