cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1551
Views
0
Helpful
1
Replies

%PNP-6-PNP_BACKOFF_NOW

thomas2220
Level 1
Level 1

 

Hi 

I am stuck to push the configuration in cloud.  I am getting error as below. 

Could you please help me find out solution ?

*Sep 22 16:51:00.233: %SYS-6-BOOTTIME: Time taken to reboot after reload = 238 seconds
*Sep 22 16:51:02.146: %SYS-5-CONFIG_P: Configured programmatically by process PnP Agent Discovery from console as vty0
*Sep 22 16:51:02.164: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Startup Config Present)
*Sep 22 16:51:05.146: %SPA_OIR-6-ONLINECARD: SPA (IR1101-ES-5) online in subslot 0/0
*Sep 22 16:51:05.791: %SYS-5-CONFIG_P: Configured programmatically by process EPM CREATE DEFAULT CWA URL ACL from console as console
*Sep 22 16:51:06.728: %TRANSCEIVER-6-INSERTED: R0/0: iomd: transceiver module inserted in Gigabitethernet0/0/0
*Sep 22 16:51:15.214: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/0, changed state to up
*Sep 22 16:51:16.039: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Sep 22 16:51:16.039: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Sep 22 16:51:16.214: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0/0, changed state to up
*Sep 22 16:51:16.502: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI created succesfully
*Sep 22 16:51:16.511: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI has been generated or imported by pki-sudi
*Sep 22 16:51:16.528: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI0 created succesfully
*Sep 22 16:51:16.533: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an authoritative time source, like NTP, can be obtained.
*Sep 22 16:51:26.987: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: SLA-TrustPoint created succesfully
*Sep 22 16:51:26.990: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
*Sep 22 16:51:26.991: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed
*Sep 22 16:51:27.004: %CALL_HOME-6-CALL_HOME_ENABLED: Call-home is enabled by Smart Agent for Licensing.
*Sep 22 16:51:53.186: %PNP-6-PNP_SUDI_UPDATE: Device SUDI [PID:IR1101-K9,SN:FCW2547XXXX] identified
*Sep 22 16:52:01.541: %WSMAN-3-INVALID_TRUSTPOINT: Trustpoint associated with HTTP is either invalid or does not exist
*Sep 22 16:52:53.903: %PNP-6-PNP_BACKOFF_NOW: PnP Backoff now for (7200) seconds requested (1/3) by (profile=pnp_cco_profile, host=devicehelper.cisco.com, port=443)

1 Reply 1

casanavep
Level 3
Level 3

What model switch and have you attempted to clear potential conflicting certificates:

delete /force nvram:*.cer
delete /force stby-nvram:*.cer

Sorry for the late reply if you've already solved this.  My guess is a cert issue, but would need to know more.