01-21-2022 12:29 PM
I have a working asa-5525x that I need to copy the image to another 5525x so I can install at another location.
Made a full backup using asdm and then tried restoring to a factory-default config, but the restore hangs at 98%.
Also tried copy and pasting the running config using the CLI and everything looks OK except the Site-to-Site VPN profiles are not
visible on the new asa, but if I try to add the profile back it says it already exists?
Solved! Go to Solution.
01-24-2022 05:17 AM
May be looking hitting old bug, Try manually copy and paste the config
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCtg76211
01-21-2022 12:41 PM
is the other ASA running the same Code? same specification?
01-24-2022 04:33 AM
OK, ran show run asdm on each box and they were different, one was running the open-jre version.
So I made sure each had the same image loaded by issuing "asdm image disk0:/asdm-792-152.bin" on each and now each are running the same image, also now the site-to-site VPN profiles are visible on 2nd box.
BUT when I try a full restore from a zip file it still hangs at 98%.
01-24-2022 05:17 AM
May be looking hitting old bug, Try manually copy and paste the config
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCtg76211
01-24-2022 06:16 AM
Yep, That is how I got the config copied over cut and paste into CLI.
01-24-2022 04:35 AM
Also both are running the same asa9.9(2) binary
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide