Adding Ports on a VG224

[arthurbecker]

Is there a user guide for adding port on a VG224 connected to a Call Manager 7.x? the interface protocol is SCCP

[David Hailey]

http://www.cisco.com/en/US/docs/routers/access/vg224/software/configuration/guide/scg.html

This is the IOS configuration.  The key command is the stcapp comman - this enables the SCCP features. When you add the gateway in CUCM, it should be fairly straightforward on how you add the actual ports.  Since you are using SCCP, it looks pretty much like most other phone configurations.

Hailey

Please rate helpful posts!